|
My Blob project!!!
COPIED FROM MY PROFILE FROM NORTH EAST SUBARU FORUM. Some of it may not make sense because I cut cut and pasted it and missed out other users comments which I have been replying too.
Hello, only been a member on NESF for a month or so now and only been an owner of a Blob for the same amount of time. Already have plans for it. Firstly I will upload some images of it now and then give a list of everything I want to do to it and any reasons for doing so. I'm open for your opinions if you want to share and any ideas you have also. I want to buy an STI from a Salvage Auction and use all the running gear from the STI and use it to convert my WRX (Salvage STI's cost around £3000-£4000). Then all the running gear I took from the WRX I can sell on to generate some cash, Im guessing I would make around £1700 so that £1700 can be knocked of the £3k-£4k I spent on the Salvaged STI, then the rest of the STI I don't need I can break for spares to sell, I could generate another £1000 so effectively if all go's well I can buy an STI for £3500 and sell the bits I don't use for £2700 making the conversion cost as little as £800. I know you will all say just sell the WRX and buy an STI but a decent low mileage STI your looking at £8000 and then you have to mod from scratch, whereas this way I have the car looking as nice as I want it and for as little as £800 I could basically have an STI. http://i1259.photobucket.com/albums/...318_165547.jpg http://i1259.photobucket.com/albums/...318_165357.jpg http://i1259.photobucket.com/albums/...318_163146.jpg http://i1259.photobucket.com/albums/...318_163013.jpg http://i1259.photobucket.com/albums/...318_162956.jpg http://i1259.photobucket.com/albums/...318_162926.jpg http://i1259.photobucket.com/albums/...318_162851.jpg Current Spec: VF34 Turbo Pink Injectors STI TMIC Stainless system and Decat Simtek Ecu Modifications I want to do: Engine: JonnyGav TD05 18g FMIC Headlight Cold Air Induction - Has anyone on here does this? If so any photos of what it looks like under the bonnet Stainless Headers and Up-Pipe STI Inlet Manifold Oil Cooler under the Scoop All Pulley's Sprayed Blue Brackets Sprayed Blue Bolts Sprayed Black White Hose Kit White Dress Up Kit Inlet Manifold Sprayed Blue Anti Lag Mafless Larger Brakes - K-Sport or Brembo's Exterior: Tinted Headlights Tinted Tail Lights Vortex Fins Interior: Flocked Interior Triple Pillar Gauges Buckets Roll Cage That's all I can think of the top of my head and its a long process project, to be honest half of the above wont even happen but whatever does happen I will update as and when it happens. Thinking of doing the FMIC and Induction this or next week. ------------------------------------The following week------------------------------------------------------------ Just an update! Current Spec: VF34 Turbo (SOLD) Pink Injectors STI TMIC (SOLD) Stainless system and Decat Simtek Ecu (Found out its actually an AlcaTek) Modifications I want to do: Engine: JonnyGav TD05 18g (Currently being built Very Happy) FMIC (Has been primed and awaiting the VHT Paint to arrive Smile Headlight Cold Air Induction - Debating on this, I have another Idea. Just to route a CAI up another route Stainless Headers and Up-Pipe (I have asked Finn to port me some headers and looking for an up-pipe) STI Inlet Manifold (Most likely buy an aftermarket race one and throttle body) Oil Cooler under the Scoop (Havent bought it yet but have organised an engineer to make me some brackets) All Pulley's Sprayed Blue (Removed from the car but spraying them white now) Brackets Sprayed Blue ( Spraying them gloss black now) Bolts Sprayed Black (Ordering new stainless bolts) White Hose Kit (Getting a blue hose kit for my birthday Smile ) White Dress Up Kit (Also getting a blue one for my birthday Smile ) Inlet Manifold Sprayed Blue (Getting sprayed White now) Anti Lag (If I have enough money hopefully Bob Rawle will be doing this 8th May) Mafless (Found out its already running maf-less) Larger Brakes - K-Sport or Brembo's Exterior: Tinted Headlights Tinted Tail Lights Vortex Fins Interior: Flocked Interior Triple Pillar Gauges Buckets Roll Cage Remap: Andy Kingdons 8th May Smile Next update will be the FMIC Sprayed and mounted, CAI intake piped to engine bay, bumper cut and fitted. Following updates will include new turbo fitted, ported headers fitted, new up-pipe and most likely blue hose kits, resprayed parts in the engine bay and FMIC piped up with induction etc. http://i1259.photobucket.com/albums/...327_164258.jpg http://i1259.photobucket.com/albums/...328_144411.jpg http://i1259.photobucket.com/albums/...329_111316.jpg ------------------------------------------------A few days after-------------------------------------------------- Just updating again! FMIC Sprayed black and mounted. http://i1259.photobucket.com/albums/...404_161800.jpg Also in the middle of removing (hacking and grinding due to how rusty it is) the headers heat shield so I can remove the Headers and send them off to Finn for them being ported Smile Also have a STI Decat up pipe in the pipeline depending on how much I can get a harveys up pipe for. http://i1259.photobucket.com/albums/...404_161808.jpg I couldnt get hold of a grinder or dremmel so my trust junior hacksaw saved my arse until it snapped and I had to finish it off with a fine toothed cheese knife which gave it a better finish than the hack saw Smile Hack saw finish.... http://i1259.photobucket.com/albums/...404_135105.jpg Cheese knife finish..... http://i1259.photobucket.com/albums/...404_161819.jpg Il keep you updated Smile --------------------------------------------A few hours later---------------------------------------------------- Hahaaaaaa Im going to fit HID's or Xenon kit anyway and the headlights are going to come out to fit the sidelight bulbs. Tango or De-Tango.... hmmmmm :/ I will have a think. Im also going to run a CAI Duct up into the engine bay too so the bumper wont be going on just yet. Her are some more photo's too, I have just put a couple of pipes in and removed the foglight housing. Foglight housing cut.. http://i1259.photobucket.com/albums/...404_171416.jpg http://i1259.photobucket.com/albums/...404_171422.jpg First pipes in place not clamped up yet. http://i1259.photobucket.com/albums/...404_172417.jpg http://i1259.photobucket.com/albums/...404_172425.jpg Bumper sat in place http://i1259.photobucket.com/albums/...404_172559.jpg |
what make is the lower lip on the front bumper mate as it looks good
|
Looks good mate.
Not a fan of roof turds sorry fake vents but the rest looks great. |
Originally Posted by tubbytommy
(Post 11051731)
Looks good mate.
Not a fan of roof turds sorry fake vents but the rest looks great. |
Loui did you manage to find a suitable up pipe yet I'm going to give Alyn at AS Performance a ring later on regarding my clutch so I will ask him for a price for you ;)
|
it looks a good project so far, what are those things on top of the lights??
|
Please Natski, I have 2 STI up pipes lined up otherwise. Tommy they are LED's. Not sure if im keen
|
Originally Posted by louimfc
(Post 11052055)
Tommy they are LED's. Not sure if im keen
Rest look very good:thumb: Paul |
The 2 Bolt Harvey up pipe is £148 wrapped with DEI heat weap Loui and are in stock bud :)
They are cheaper un wrapped but didn't ask how much as you want it wrapped ideally and DEI wrapping is about as good as it gets.. I never mentioned the LEDs on NESF cos I didn't want to offend you but they do look a tad ****e m8y |
That's from Alyn at AS Performance bud he is on here his trade account name is As Performance and he also has a user account named stockcar..
|
Originally Posted by louimfc
(Post 11051968)
Each to their own, I know what you mean. I wouldnt buy one but it came on the car and I like it now
|
lower lip ????????????????????????????????????
|
Originally Posted by *BADGER*
(Post 11052236)
lower lip ????????????????????????????????????
http://i890.photobucket.com/albums/a...ps485100e4.jpg |
Originally Posted by *BADGER*
(Post 11052236)
lower lip ????????????????????????????????????
Yeah LED's will most likely go. Cheers Nat I will have to count my pennies and see what I will have to play with but its looking like an STI one |
Originally Posted by tubbytommy
(Post 11052241)
|
Nice project thread fella!
Car and mods look lovely!! |
Just updating again!
FMIC Sprayed black and mounted. https://i1259.photobucket.com/albums...404_161808.jpg Also in the middle of removing (hacking and grinding due to how rusty it is) the headers heat shield so I can remove the Headers and send them off to Finn for them being ported :) Also have a STI Decat up pipe in the pipeline depending on how much I can get a harveys up pipe for. https://i1259.photobucket.com/albums...404_161800.jpg I couldnt get hold of a grinder or dremmel so my trust junior hacksaw saved my arse until it snapped and I had to finish it off with a fine toothed cheese knife which gave it a better finish than the hack saw :) Hack saw finish.... https://i1259.photobucket.com/albums...404_135105.jpg Cheese knife finish...... https://i1259.photobucket.com/albums...404_161819.jpg Il keep you updated :) ------------------------------------------------------------------------ Hahaaaaaa Im going to fit HID's or Xenon kit anyway and the headlights are going to come out to fit the sidelight bulbs. Tango or De-Tango.... hmmmmm :/ I will have a think. Im also going to run a CAI Duct up into the engine bay too so the bumper wont be going on just yet. Her are some more photo's too, I have just put a couple of pipes in and removed the foglight housing. Foglight housing cut.. https://i1259.photobucket.com/albums...404_171422.jpg and again.. https://i1259.photobucket.com/albums...404_171416.jpg First pipes in place not clamped up yet. https://i1259.photobucket.com/albums...404_172417.jpg https://i1259.photobucket.com/albums...404_172425.jpg Bumper sat in place https://i1259.photobucket.com/albums...404_172559.jpg ------------------------------------------------------------------------ Just an update! Current Spec: VF34 Turbo (SOLD) Pink Injectors (Keeping) STI TMIC (SOLD) Stainless system and Decat (Keeping) Simtek Ecu (Found out its actually an AlcaTek) Maf-less Modifications I want to do: Engine: JonnyGav TD05 18g (Currently being built) FMIC (Fitted and sprayed) Ported Headers and STI Up pipe (Collecting next week) Tumbler Delete Oil Cooler under the Scoop (Havent bought it yet but have organised an engineer to make me some brackets) All Pulley's Sprayed White (Need to shot blast) Brackets Sprayed Black ( Need to shot blast) Blue Hose Kit (Ordered) Blue Dress Up Kit (Ordered) Inlet Manifold Sprayed White (Needs shot blasting Anti Lag (If I have enough money hopefully Bob Rawle will be doing this 8th May) Larger Brakes - K-Sport or Brembo's Exterior: Tinted Headlights Tinted Tail Lights Vortex Fins Rear Diffuser Front Splitter Top Spoiler Interior: Flocked Interior Triple Pillar Gauges Buckets Roll Cage Remap: Andy Kingdons 8th May Smile (Deposit Paid) -------------------------------------------------------------------- Set off to tackle my corroded heat shield today and after fighting for an hour in the cold I called it a day. I discovered my up-pipe isn't the WRX one but im not sure which up-pipe it is. Here are some images on the rust I have had to grind away and also some of the up pipe if you can identify... https://i1259.photobucket.com/albums...409_133724.jpg https://i1259.photobucket.com/albums...409_142758.jpg https://i1259.photobucket.com/albums...409_142749.jpg https://i1259.photobucket.com/albums...409_142736.jpg https://i1259.photobucket.com/albums...409_142808.jpg ------------------------------------------------------------------- Received my hose kit today, only the start to my engine bay makeover. Only cheap hoses but seem strong and thick enough. Im not sure I would go cheap on intake hose. If my dress up kit arrives tomorrow I will update some more photo's plus if my paint arrives some of the FMIc pipes will be finalized and fitted too. https://i1259.photobucket.com/albums...410_190508.jpg ----------------------------------------------------------------------- Pretty happy chappy this morning! Apart from being burnt several times by shrapnel from drilling and the headers falling from the car and landing on my head... overall a good morning! It is a slip jointed up-pipe and also Im sure the headers are ported! I removed all the rusty heat shield and the new heat wrap is in the post :) Here are some photo's anyway of the aftermath and the headers and up-pipe etc. The aftermath... https://i1259.photobucket.com/albums...411_111257.jpg https://i1259.photobucket.com/albums...411_111305.jpg What a relief I took the headers off because they were full of coolant, when disconected the turbo the hose must have pointed down the up pipe :/ https://i1259.photobucket.com/albums...411_111352.jpg Up pipe.. https://i1259.photobucket.com/albums...411_111432.jpg https://i1259.photobucket.com/albums...411_111832.jpg Can anyone identify if these have been ported, I reckon so.. https://i1259.photobucket.com/albums...411_111444.jpg https://i1259.photobucket.com/albums...411_111631.jpg https://i1259.photobucket.com/albums...411_111841.jpg https://i1259.photobucket.com/albums...411_111922.jpg https://i1259.photobucket.com/albums...411_111928.jpg Rusty shield! https://i1259.photobucket.com/albums...411_113635.jpg ---------------------------------------------------------------------- More blue......... https://i1259.photobucket.com/albums...411_143237.jpg https://i1259.photobucket.com/albums...411_143250.jpg ----------------------------------------------------------------------- Pipes sprayed and ready to go on https://i1259.photobucket.com/albums...412_092920.jpg ------------------------------------------------------------------------ I have adapted my K&N Typhoon to fit my car by removing the pipe which takes it through the inner wing to this....... but is it just me or is that cone too small? If so I will just sell the full unit and buy a larger cone and trumpet. Cheers https://i1259.photobucket.com/albums...413_194907.jpg https://i1259.photobucket.com/albums...413_194916.jpg https://i1259.photobucket.com/albums...413_194858.jpg ------------------------------------------------------------------- TD05 18g back on home turf! Headers due on Tuesday! https://i1259.photobucket.com/albums...414_234211.jpg https://i1259.photobucket.com/albums...414_234225.jpg https://i1259.photobucket.com/albums...414_234233.jpg ---------------------------------------------------------------------- Since running low on cash I started to piece the car together. Headers are coming tomorrow at 3pm :) Happy chappy, the post man better pull his finger out of his arse and deliver my gaskets tomorrow and she should.... be running again :) I had the turbo in place earlier and wow I cant wait! Here are some more pictures to show progress https://i1259.photobucket.com/albums...415_153352.jpg https://i1259.photobucket.com/albums...415_153412.jpg https://i1259.photobucket.com/albums...415_153424.jpg https://i1259.photobucket.com/albums...415_173606.jpg https://i1259.photobucket.com/albums...415_173717.jpg https://i1259.photobucket.com/albums...415_173726.jpg https://i1259.photobucket.com/albums...415_173933.jpg https://i1259.photobucket.com/albums...415_183424.jpg https://i1259.photobucket.com/albums...415_183442.jpg https://i1259.photobucket.com/albums...415-WA0001.jpg https://i1259.photobucket.com/albums...415-WA0002.jpg :) I will upload the video of me trying to turn it over tomorrow ;) --------------------------------------------------------------------- Cheers Daz :) I never received the headers today due to unforeseen circumstances. They are due tomorrow around 5ish. So I get to start her for the first time whilst everyone is trying to enjoy their tea and watch TV :) Anyway here is todays progress.... Gaskets arrived! https://i1259.photobucket.com/albums...416_133233.jpg My 18g fitted :) Well in place, I realised the up pipe needs to be loose for the headers to fit (the hard way) https://i1259.photobucket.com/albums...416_151629.jpg Also missing 1 nut and bolt I will need to fit tomorrow https://i1259.photobucket.com/albums...416_151638.jpg Topping her up from replacing all the hoses :) https://i1259.photobucket.com/albums...416_160403.jpg https://i1259.photobucket.com/albums...416_160437.jpg Looking sexy with the FMIC! Really needs that "L1OU JH" plate if anyone wants to treat me for my birthday present ;) https://i1259.photobucket.com/albums...416_161110.jpg Missing the dump valve... but we dont need one of them ;) We just need a bung!!! https://i1259.photobucket.com/albums...416_161118.jpg Started to clean it and discovered this :@ The wind has blew a tile off the roof and onto the car.. dents and scratches!! https://i1259.photobucket.com/albums...416_162008.jpg https://i1259.photobucket.com/albums...416_162609.jpg but then I fitted the sticker and it cheered me up!!! https://i1259.photobucket.com/albums...416_163706.jpg https://i1259.photobucket.com/albums...416_163804.jpg https://i1259.photobucket.com/albums...416_163815.jpg Now waiting for it to dry so i can chamois it and polish it ;) https://i1259.photobucket.com/albums...416_171111.jpg https://i1259.photobucket.com/albums...416-WA0000.jpg Tomorrow I will finish it and upload the video etc. and then until summer I will be skint ! So no more project til then. I will get some photos of the mapping day 8th of May though!! -------------------------------------------------------------------------- Spent some more time with my chamois... https://i1259.photobucket.com/albums...416_184255.jpg ......and then noticed a fooking chip in my windscreen!! WTF!! Gavin from Autoglass best get a shift on!!! https://i1259.photobucket.com/albums...416_184306.jpg ------------------------------------------------------------------------ She is running :) Not 100%..... but running. Here are some uploads from today.. Ported headers :) https://i1259.photobucket.com/albums...417_154257.jpg Removed the heat shield https://i1259.photobucket.com/albums...417_161337.jpg Wrapped the headers! https://i1259.photobucket.com/albums...417_174449.jpg At first it wasnt boosting it blew the FMIC pipe off because I didnt do a bolt up. Then after I fixed that I went to a friends and borrowed his dump valve with his strongest spring to act as a bung. Its boosting now and giving off a nice chatter but the boost is piss poor and whistles alot whilst boosting, im guessing a boost leak somewhere but thats tomorrows adventure ;) Any ideas on whistling whilst coming on boost also how to check for a boost leak? Thanks :) https://i1259.photobucket.com/albums...417_200501.jpg https://i1259.photobucket.com/albums...417_200437.jpg ------------------------------------------------------------------------ http://i1259.photobucket.com/albums/...418_151947.jpg |
thats a lot of rust!
|
Originally Posted by dj219957
(Post 11064055)
thats a lot of rust!
|
Yurp, unfortunately was pretty rusty. I have cut all that out and now all the headers are wrapped it looks nicer :)
|
What fmic have u used? Looks well!
|
Just to clear up the question about the lower front lip..
It's called a Lester Bumper, and they're very rare!... I know this as it's the same as mine :D lol |
| All times are GMT +1. The time now is 01:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands