JDM blob STi project
 

Hi guys,

Only had my new Subaru a couple of weeks, started the modding already so thought i'd start a project thread. I'm also a bit of a clean freak and plan on making it über clean, although not 'mint' / concours etc as I fully intend on driving the car. Luckily it's only a weekend car so during the week will be when it gets its TLC.

2003 JDM STi

46,000

Usual JDM spec. For those not in know about the differences between jap / uk models of the blob sti (as I didn't).........

Forged internals,
Twin Scroll turbo,
DCCD,
Shorter ratio 5th and 6th gears,
Quicker steering rack,
IC spray,
Red glow dials with shift indicator and start up dial sweep

Remap by Rich at Powerstation......352 / 339lb/ft

K + N panel filter

Full Miltek system with Miltek sports cat


These are the only engine mods. The only other engine mod that ill be doing is an HKS SSQV (on its way!!)

The car was in at Extreme Scoobies yesterday. Had a full service and check up, stereo put in, mudflaps put on, set of locking wheel nuts and new front wiper blades.

I have a brand new set of pro race 1.2's in gloss black on their way in 18x8 fitment. These will hopefully be here late next week. Pics will be up as soon as they're fitted.

Currently in the process of blitzing the engine bay. Will be replacing any rusty nuts and bolts etc. cleaned the exhaust today too. Also clean around all the door / boot seals.

More pics and stuff to come over the coming days. Cheers for looking guys. ALL comments welcome, suggestions / questions etc also welcome!!

Just after I bought it

http://i209.photobucket.com/albums/b...psa7824f8c.jpg

At extreme scoobies having the mudflaps done

http://i209.photobucket.com/albums/b...psa4cb4aa4.jpg

Exhaust half-done

http://i209.photobucket.com/albums/b...ps95af345f.jpg

http://i209.photobucket.com/albums/b...ps7bb07931.jpg

Before a clean

http://i209.photobucket.com/albums/b...ps6cc9f861.jpg

After the clean

http://i209.photobucket.com/albums/b...psfc89c610.jpg

http://i209.photobucket.com/albums/b...ps65fd0c8b.jpg

http://i209.photobucket.com/albums/b...psa4801d6a.jpg

Pioneer head unit in

http://i209.photobucket.com/albums/b...ps2a50728a.jpg

Boot trim all cleaned up

http://i209.photobucket.com/albums/b...ps2bc9f202.jpg

Random pic of the back end. Car will be fully detailed outside when the new wheels are on! It's minging at the mo!!

http://i209.photobucket.com/albums/b...ps4a754c6d.jpg

Lovely. :luvlove:

Quick update......

Got these delivered today! 18x8. Having them fitted with Falkens. Absolutely no point in going for a top notch tyres. The car only gets used at weekends and covers small mileage. No track days or anything. Didn't want to get anything really low budget though.

http://i209.photobucket.com/albums/b...ps07a4427e.jpg

Fitted pics tomorrow!

Lovely scoob , I have the same pioneer head unit as you . Sound is soo much nicer than standard . Nice wheel choice too .

Yeah it's a cracking head unit mate, good price too!! Check out the below for the update on the "nice wheel choice" too lol!!

Woke up this morning and one of my brand new, only fitted yesterday, tyres was flat. Took it down to the garage, couldn't find a leak, pumped it up, seemed to be ok. It was decided that there may have been an air leak because it was a brand new rim and tyre. However, because it was driven down almost flat, this may have heated it up and sealed it. Fair enough!!

Got back from the garage, started cleaning it. Put some water /shampoo solution on the wheels, noticed there was a small amount of bubbling coming from somewhere, upon closer inspection, found this!! Tiny pin-prick hole that goes through the wheel, allowing air to escape!

http://i209.photobucket.com/albums/b...ps504b9b51.jpg

Currently sorting it out as we speak! Gutted to be honest!

Sorted the wheel situation out. Rimstock are sending out a new wheel next week.

Anyhow, took a pic after I'd cleaned the car with wheels still on.......

http://i209.photobucket.com/albums/b...ps3bfba399.jpg

Love the JDM STIs and liking your wheel choice mate. Pisser about the porosity but at least they're sorting I for you.
Nice wheel choice, they suit it well and a tasteful design. Good luck with your project and hope to see you at an Essex meet soon :)

Cheers for the compliments mate!

I was going to come to the monthly meet tomorrow, but that's off the cards now because of the wheel situation. This is what's annoyed me the most to be honest, not bein able to go to the monthly meet!

Well it's only he Southend Run that occurs on the first Saturday of the month. Our main monthly meet is our pub meet which usually works out the last Saturday of the month but sometimes changes.
Hopefully I out weather ever sorts itself out and warms up I'd like to get some more meets occurring. So there will be plenty for you to attend :)

Been a beautiful day today, so decided to crack on with the scoob! Wheel arches were 'interesting' to clean to say the least!!

Also t-cut a few bits, then started on the polish / wax. Will be doing this over the next few days so long as the weather holds out!

http://i209.photobucket.com/albums/b...ps535ab66f.jpg

http://i209.photobucket.com/albums/b...ps8c05a471.jpg

Reflection shot:

http://i209.photobucket.com/albums/b...ps6dfb06a7.jpg

Carried on cleaning after dinner, pretty much until it got dark. The petrol cap has been properly annoying me, especially as it gets opened so often, so I de-gunged that!

http://i209.photobucket.com/albums/b...ps8e56c92f.jpg

Last reflection shot of the day!

http://i209.photobucket.com/albums/b...psa5a366fb.jpg

SOME shine , also likin the wheel choice

So, been carrying on the cleaning again today guys. Also sorted out a stereo problem. Basically, I had a new stereo put in, but the radio signal was extremely weak, so, following some advice from members on here, it seems it was a simple case of connecting these 2 together.....

http://i209.photobucket.com/albums/b...ps18ba2201.jpg

5 min job, perfect radio signal. You learn something new every day lol!

Some more reflection shots. Removed the front number plate to gain access to the paint around it, just a bit easier than trying to polish it with the number plate still on!

http://i209.photobucket.com/albums/b...ps4c41d5e9.jpg

http://i209.photobucket.com/albums/b...psd16b79ed.jpg

http://i209.photobucket.com/albums/b...ps3fbc9b32.jpg

http://i209.photobucket.com/albums/b...ps9f26a608.jpg

http://i209.photobucket.com/albums/b...ps9ecd1d3a.jpg

So, carried on again until the light was no more this evening. Cleaned out all the gunk that builds up between the panels, plus I gave the locks a good clean.

http://i209.photobucket.com/albums/b...ps6a0eed07.jpg

Also got a layer of rim-wax on the wheels, keep them protected from all the cak on our roads!

http://i209.photobucket.com/albums/b...ps1703ae90.jpg

nice bud, you'll be frightened to drive it incase it gets dirty :-)

Looking very tidy:thumb:

Another nice day today, so I decided to crack on and give my inter cooler and strut brace a bit of a re-furb!

Started by removing the brace and ic / y-pipe.

Gave everything a serious clean using autoglym machine cleaner and then a good rinse. Didn't seem to make much difference, but all the surface rubbish had been removed so all good.

http://i209.photobucket.com/albums/b...psb8da0c76.jpg

http://i209.photobucket.com/albums/b...ps9075c6e1.jpg

Masked everything up.

Sprayed away basically lol! Did a number of light coats, letting each coat dry and then applying the next until everything had a decent, equal covering. I bought the closest shade of silver to the OEM metal color that i could as I want to keep it looking standard!

http://i209.photobucket.com/albums/b...ps4ceb9a6a.jpg

http://i209.photobucket.com/albums/b...ps4d484be9.jpg

Nice work mate. Fresh OEM is always the way to go :)

Agreed on that mate!! Trying to work out the best way of getting the fins clean, although with the exception of spraying everything silver, and then re-doing the 'sit' stencil, there's not much that can be done!

That's pretty much the only way to do it.
Straighten any bent fins, then blow through with an airline. Then degrease and dust over with silver and stencil.

Any idea where to get a stencil from, or is it just a DIY job?

Could be DIY. But I'd be tempted to get a vinyl sticker cut to used as a stencil. Dust your red on first. Let that dry, and add the stencil and coat with silver.

Got my new alloy today, so first job was to fit that....2 min job.

About 10 secs after the alloy was delivered, another van turned up with my front splitter!! Purchased from HT Autos, took about 30 mins to fit, pretty simple but I decided to use my own bolts as I felt the ones that came with the kit looked a bit feeble.

http://i209.photobucket.com/albums/b...ps35723aff.jpg

http://i209.photobucket.com/albums/b...ps5f9117a3.jpg

Crying out to be lowered, then that's job done :)

Look really well , think that 45mm springs would be perfect drop on this if any thing .

Excellent looking car mate!

Cheers again for the compliments guys, makes it worthwhile!

Beautiful day again today so decided to sort the rear foglight out. Unlike usually on the JDM's where the foglight hangs down, mine has been built into the rear bumper by one of the previous owners. Not a problem with this, but it did need a clean up as I felt the standard of it was letting the rear own!

Before:

Faded grey with rusty screws

http://i209.photobucket.com/albums/b...psbe5ecf2b.jpg

So, I removed it and stripped it down,

Primered in grey (2 coats),

Sprayed in satin black (3 light coats)

Lacquered (2 lacquer coats)

Allowed to dry for a few hours and put back together,

After:

Gloss black, black / silver screws

http://i209.photobucket.com/albums/b...psaa8f4e5b.jpg

Like :D

Quality work, looking forward to the big engine build and turbo coming soon.

:lol:

This looks awesome now! It's making me feel bad for neglecting mine ( identical to yours apart from wheels and loads of muck, scratches and little bits and bobs which need fettling )

Keep up the good work

Mick