exhaust question for exhaust know-it-all's
1st off my car is a blob wrx.
am i right in thinking that the exhaust system from the turbo back is a 4 piece system consisting of........ -downpipe that has a cat -second cat pipe that bolts to the center section and the downpipe -center section -back box my wondering this is i want to buy this http://www.scoobyworld.co.uk/catalog...oducts_id=1972 and one of these http://www.scoobyworld.co.uk/catalog...oducts_id=2057 my car is fitted with a miltek downpipe (de-cat) and it did have a sports cat after that bolted to a center pipe then backbox but i removed it,if i buy the after burner center pipe and backbox would i then need to buy a pipe to fit the center pipe to the downpipe or is the afterburner center pipe a complete length long enough from backbox to the downpipe? |
Does your system at the moment consist of down pipe, centre section and back box??
Harri |
my blob sti system is in 3 pieces decat downpipe, middle section and back box.
you may have issues trying to build an exhaust from different bits fitting wise. your best option is to buy a turbo back system to ensure it fits. |
if your 2pce cat pipe has now been replaced with a single de-cat pipe then it will fit no issues
|
There was a full system on ebay for 30 quid, its the 3rd time its been on and still got no bids. His feedback rating is a bit poor mind.
|
Confusing.
It's a 3 piece system, downpipe, centre and back box. If you have a milltek downpipe fitted then I'd replace centre and back box with milltek items as if you leave milltek downpipe on and fit other pipes after it you'll have length issues as millteks are funny sizes to mate up. I'm sure the downpipe is not as long as normal ones. What uppipe have you got fitted? |
Originally Posted by bustaMOVEs
(Post 11016946)
Confusing.
It's a 3 piece system, downpipe, centre and back box. If you have a milltek downpipe fitted then I'd replace centre and back box with milltek items as if you leave milltek downpipe on and fit other pipes after it you'll have length issues as millteks are funny sizes to mate up. I'm sure the downpipe is not as long as normal ones. What uppipe have you got fitted? the miltek downpipe i have is de-catted but it has a cat shape thing in the pipe,could this be a resonator? |
just found the receipt from powerstation,heres the description....
-subaru 3" catrep downpipe-part no-mssub133 -subaru spec c hi-flo cat center pipe-part no-mssub127 -subaru 3" rear silencer-part no-mssub128 the centerpipe and rear silencer have been sold so all im left with is the miltek down-pipe |
Originally Posted by the shreksta
(Post 11018318)
standard up-pipe at the min mate
the miltek downpipe i have is de-catted but it has a cat shape thing in the pipe,could this be a resonator? Best to mate up with milltek items if your keeping downpipe. Replace uppipe also with decat presuming you have wrx one fitted. Oh and a friendly mot at the ready. |
All times are GMT +1. The time now is 12:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands