Here's my initial research copied from the RA forum where we had a discussion around the subject.
Ok to business... Ive been searching and reading up on rust treatment etc today and Dinitrol really seems to keep appearing when I search and appears to have a grat name in the coating and rust treatment areas. I'm using the Frost web site for referance as it's quite comprehensive, so basic rust idea is to cure it and stop any you have spreading, with my inner sills I am going to assume there will be some surface patches that are out of sight and that I will not be able to see so this I feel could be the first step to take... http://www.frost.co.uk/dinitrol-conv...r-aerosol.html I'm looking for all to be aerosol cans as for me that is my option as I do not have a compressor or any gns to use etc. Next step could be a choice of two, also extension nozzles are available for getting deep inside the shell. The one thing I need to double check is the finish colour as I'm sure one below is a black finish which will be ok fir the inner sills. http://www.frost.co.uk/dinitrol-3125-hs-500ml.html http://www.frost.co.uk/dinitrol-ml-p...kin-500ml.html Extension... http://www.frost.co.uk/extension-hose-60cm.html This is a clear finish which could possibly be considered for inside the doors and boot interior around the arches. I'm nervous about going to mad in the doors with a substance that will bulk in volume as you could possibly cause more bad than good by harbouring the inner door drainage so if I applied anything in there it would need to be clear and a thin coating. http://www.frost.co.uk/dinitrol-corr...010-500ml.html Another interesting web site with plenty of info... http://www.rejel.com/ |
After taking with Ade who had personal experience with Bilthamber S50 I purchased the one can for my inner sills.
http://www.bilthamber.com/dynax-s50 All I need to do now is get a neutraliser for any scab that's in there before I apply the S50 If brands mix I'm thinking of the converter from Dinitrol but I'll see what BiltHamber offer first. |
Did you see the thread I started on rust treatment recommendations . The following link was posted there http://www.auson.se/sites/default/fi...nthly_uk_0.pdf
|
No I had not seen that I'll have a look through it.
|
12 Attachment(s)
Ok so I started my inner sill preventive maintainance today... First stage is a coat of Dinitrol rust converter sprayed into the inner sills, this will penetrate into every area to convert and neutralise any rust already lurcking. Stage two will follow tomorrow.
http://img.photobucket.com/albums/v1...0BDE2F33E8.jpg Attachment 44908 Attachment 44909 Tape the holes up to contain the spray. Attachment 44910 Extension nozzle. Attachment 44911 Gaps ! Attachment 44912 Attachment 44913 Attachment 44914 Inside the sills. Attachment 44915 Attachment 44916 Attachment 44917 Attachment 44918 First time I realised there were drainage holes under the sills. Attachment 44919 |
5 Attachment(s)
All finished today... Anti corrosion wax oil applied.
Attachment 44849 Attachment 44850 Attachment 44851 Attachment 44852 Attachment 44853 |
I just read the whole thread, awesome work mate. :)
Defenitly a lot work gone into the car. Do you have any more plans for it, or is it as good as done now? |
Originally Posted by Aram
(Post 11719445)
I just read the whole thread, awesome work mate. :)
Defenitly a lot work gone into the car. Do you have any more plans for it, or is it as good as done now? |
Yeah I'll be doing this at some stage, cheers si
|
Originally Posted by joe v3sti
(Post 11719676)
Yeah I'll be doing this at some stage, cheers si
|
1 Attachment(s)
|
|
Your RA did look great at the On your marks charity day :notworthy :thumb:
Did you take it on track? What would I need to do to get on the track for next year's event? Regards, Subaru Collector 555. |
Awesome car this, great to see it in the flesh Sunday, the underneath sooo clean :cool:
Regarding the rust proofing, where did you get the Dinitrol etc from? Is there an alternative that isn't £25 a can or is it worth it for the quality of the product? You've inspired me to do mine now just pricing up options. Paul |
Originally Posted by Subaru Collector 555
(Post 11722648)
Your RA did look great at the On your marks charity day :notworthy :thumb:
Did you take it on track? What would I need to do to get on the track for next year's event? Regards, Subaru Collector 555.
Originally Posted by averyp2
(Post 11722732)
Awesome car this, great to see it in the flesh Sunday, the underneath sooo clean :cool:
Regarding the rust proofing, where did you get the Dinitrol etc from? Is there an alternative that isn't £25 a can or is it worth it for the quality of the product? You've inspired me to do mine now just pricing up options. Paul |
I have had a photo shoot done with the car...
https://www.scoobynet.com/members-ga...on-sti-ra.html I'll be adding to it over the next day or too. |
Originally Posted by Silver Scooby Sport
(Post 11729306)
I have had a photo shoot done with the car...
https://www.scoobynet.com/members-ga...on-sti-ra.html I'll be adding to it over the next day or too. |
1 Attachment(s)
Originally Posted by trails
(Post 11729347)
Looking forward to seeing what kind of outfit you are rocking Si 😍
For now I have to give it attitude :thumb: Attachment 43824 |
|
:lol1: I've just had to google Terry Tibbs !
|
9 Attachment(s)
Ok covered a few more steps just lately...
First off I have changed the colour of my spare set of wheels to matt balck. Attachment 43672 Attachment 43673 Attachment 43672 Much happier with the colour and I think it will work well on the car, just rattle cans so I can always have a change when I want to now. Also had a pro shoot done showing the car at it's very best... Attachment 43675 Attachment 43676 Attachment 43677 Attachment 43678 Attachment 43679 Attachment 43680 |
wow this is lovely .my v3 sti is going in for a rebuild full freshen up good work there
|
Originally Posted by Silver Scooby Sport
(Post 11730230)
Ok covered a few more steps just lately...
First off I have changed the colour of my spare set of wheels to matt balck. http://img.photobucket.com/albums/v1...27A0E72C16.jpg http://img.photobucket.com/albums/v1...B18AC9A6E2.jpg http://img.photobucket.com/albums/v1...27A0E72C16.jpg Much happier with the colour and I think it will work well on the car, just rattle cans so I can always have a change when I want to now. Also had a pro shoot done showing the car at it's very best... http://img.photobucket.com/albums/v1...hoot%20010.jpg http://img.photobucket.com/albums/v1...hoot%20040.jpg http://img.photobucket.com/albums/v1...4103369B63.jpg http://img.photobucket.com/albums/v1...F2D5BC703E.jpg http://img.photobucket.com/albums/v1...42931066B0.jpg http://img.photobucket.com/albums/v1...hoot%20023.jpg Absolutely love these photos!! Your hard work and man hours can be seen all over this car! Such a gem! - Would love to be able to buy this car (ver. 1 sti ra jdm) new. I know it'll never happen but imagine picking it up from the showroom :D Tom. |
2 Attachment(s)
Originally Posted by malcs scooby
(Post 11730464)
wow this is lovely .my v3 sti is going in for a rebuild full freshen up good work there
Originally Posted by scoobydreamer11
(Post 11731618)
Absolutely love these photos!! Your hard work and man hours can be seen all over this car! Such a gem!
- Would love to be able to buy this car (ver. 1 sti ra jdm) new. I know it'll never happen but imagine picking it up from the showroom :D Tom. Purchased a decal for my strut brace yesterday :) Attachment 43481 Shaun has been on photoshop having a play with the contrast. Attachment 43482 |
3 Attachment(s)
Winter wheels on and what a difference a colour makes.
Attachment 42748 Attachment 42749 Attachment 42750 |
What do you need winter wheels for - it only sits in a garage! :D
|
Originally Posted by JonMc
(Post 11740521)
What do you need winter wheels for - it only sits in a garage! :D
The car will do a few miles on them but not to many in reality. |
Largely given up commenting on your car Si because frankly ive run out of things to say. Its truly a superb example and thoroughly deserves all the praise and compliments its receives. A testament to you vison, hard work and impecable attention to detail.
A car that any Subaru/rally enthusiast would be proud to own and drive. The black wheels really look smart on it and are a superb contrast for the chillier months. However on the gold Revs it looks simply perfect. Other than the engine, theres simply nothing id bother changing. Although (Splitting hairs i know) maybe get the AC pump off over winter and get the AC clutch re zinc coated? Are you still contemplating breathing on the engine at all? |
Originally Posted by frayz
(Post 11741038)
Are you still contemplating breathing on the engine at all?
|
i like the OEM+ style to Simons modifications so far. So maybe a full newage JDM twinscroll swap would be lovely or id be tempted to get an S5/S6 WRC style cooling package made up and aim for a mega responsive 400bhp ;)
|
All times are GMT +1. The time now is 10:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands