Blobeye Grill Options
Evening Ladies/Gents,
Today I set to work resealing my headlights, as it looks like the previous owner had them detangoed and they were letting a little water in. That went fine, but when inspecting the top grill close up, it looks like the badge has been changed at somepoint and the old one must have been chiseled out with a flathead screwdriver - making a bit of a mess of the grill. A quick google suggests a couple of replacement options: http://www.scoobyparts.com/acatalog/...LLE_03-05.html Does anybody know how these look on the car with the two uprights at either end? Some photographs would be nice, and also is there a way to attach a badge - or is it more for a badgeless mesh only setup? http://www.scoobyparts.com/acatalog/...S_-_BLACK.html I quite like the upper grill portion of this, but I dislike the lower part. Does anybody have any photographs of this fitted to a car with the standard lower grill, and does the ZUN SPORT grill use the standard clips/fixings? |
Originally Posted by Fonzey
(Post 10863331)
Evening Ladies/Gents,
Today I set to work resealing my headlights, as it looks like the previous owner had them detangoed and they were letting a little water in. That went fine, but when inspecting the top grill close up, it looks like the badge has been changed at somepoint and the old one must have been chiseled out with a flathead screwdriver - making a bit of a mess of the grill. A quick google suggests a couple of replacement options: http://www.scoobyparts.com/acatalog/...LLE_03-05.html Does anybody know how these look on the car with the two uprights at either end? Some photographs would be nice, and also is there a way to attach a badge - or is it more for a badgeless mesh only setup? http://www.scoobyparts.com/acatalog/...S_-_BLACK.html I quite like the upper grill portion of this, but I dislike the lower part. Does anybody have any photographs of this fitted to a car with the standard lower grill, and does the ZUN SPORT grill use the standard clips/fixings? here is the car now. a bit different 3 years later http://i890.photobucket.com/albums/a...821_184600.jpg top grill is simple push fitting, bottom requires a few holes but simple enough. |
I have the top one with mesh behind it and my sti badge on it im looking for the standard one if you want to swap
|
As I say, my standard one is a bit rough around the edges to be honest - it wouldn't be a fair swap!
That looks good tubby, does the upper grill from Scooby parts include the pink centre badge and STI badge? |
no the sti badge was already on the old grill and the centre badge is a genuine part also from same place.
|
Upto you mate here if you want to swap
|
Originally Posted by tubbytommy
(Post 10863380)
no the sti badge was already on the old grill and the centre badge is a genuine part also from same place.
Cheers Fonz |
Originally Posted by Fonzey
(Post 10863387)
Does it include any badge at all, or just a blank space?
Cheers Fonz you push out the old mesh and clip in the new zunsport grill. |
Originally Posted by tubbytommy
(Post 10863393)
its your original grill still, the zunsport part is only the mesh.
you push out the old mesh and clip in the new zunsport grill. Unfortunately that leaves me short of what I actually need to replace! I wonder what a standard replacement would cost from Subaru... |
Originally Posted by Fonzey
(Post 10863404)
Ah that makes sense now, cheers!
Unfortunately that leaves me short of what I actually need to replace! I wonder what a standard replacement would cost from Subaru... |
Thanks Tubby, I'll look into it.
|
Sourced an OEM grill from the STI being broken in the breaking section of these forums! :)
|
All times are GMT +1. The time now is 03:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands