Opensource Base map (With mods)
Does anyone have an opensource hex base map for the following:
Bugeye 2002 WRX Mods to be fitted: Complete decat 3" Exhaust Panel FIlter Everything else stock. ECU is a A4SE900D (AF531 7555) I have the base map but was wondering if anyone has one with the mods I have listed so I have a basic starting point to go off when above parts are fitted. |
Originally Posted by d4vidh
(Post 10838740)
Does anyone have an opensource hex base map for the following:
Bugeye 2002 WRX Mods to be fitted: Complete decat 3" Exhaust Panel FIlter Everything else stock. ECU is a A4SE900D (AF531 7555) I have the base map but was wondering if anyone has one with the mods I have listed so I have a basic starting point to go off when above parts are fitted. You can get away with using a one map fits all ( it's better than running the stock map with mods ) but you would be better starting now and you can learn as you go along , a little at a time |
Cheers toneh
I was after a map that had similar mods to what I want to install then tweak that rather than go from base |
Originally Posted by d4vidh
(Post 10839021)
Cheers toneh
I was after a map that had similar mods to what I want to install then tweak that rather than go from base |
Pm sent wideband sensor is on my shopping list so will not start doing anything until I have all the bits needed.
|
Got one or two here from my motor if interested (same code A4SE900D, coincedentally A4SE700D will also work from earlier bugs). Was running a tad under 17psi happily until I upgraded to VF24 and still going strong.
One of my earlier efforts into OS mapping but was told at the time that it was looking pretty good data wise, drove great on the road too. Timing was smoothed out a touch afterwards. If you use anyone elses base maps, log as much as you can and tweak, dont just flash and forget, it is part of the fun when you can feel the changes making a positive impact. http://img.photobucket.com/albums/v1...rendy/plot.jpg |
Originally Posted by brendy76
(Post 10839412)
Got one or two here from my motor if interested. Was running 17psi happily until I upgraded to VF24 and still going strong.
|
Ahh right no probs.
|
I was gonna suggest starting to post some maps up
But like you say there is a temptation to just flash a map in and think that it's all good That's why I recommended the op start from scratch , also I've advise he log it to death both before and after to see what effect his mods and mapping are having |
Remapping your own ECU
Hi
I an glad you have posted this up as i am in the same position. I have a 2003 WRX which has decat up down and centre pipe and panel filter. I would like to load a prodrive map into the ECU to give approx 265BHP with these mods rather than remap. I understand that Prodrive just used a generic safe map when upgrading the WRX to PPP and did not see the need to map individual vehicles. Failing the above does any one know if you can change the ECU for a PPP unit without affecting the cars security and immobilisation system I am sure this has been debated many times before but cannot find much info on here using the search engine. Have spoken to a fair number of tuners who all want to remap at £500 to £600 with the Vat. I am aware i will need to download software and purchase an OBD to USB cable, any advise on this would be gratefully received. John |
Originally Posted by brendy76
(Post 10839412)
Got one or two here from my motor if interested (same code A4SE900D, coincedentally A4SE700D will also work from earlier bugs). Was running a tad under 17psi happily until I upgraded to VF24 and still going strong.
One of my earlier efforts into OS mapping but was told at the time that it was looking pretty good data wise, drove great on the road too. Timing was smoothed out a touch afterwards. If you use anyone elses base maps, log as much as you can and tweak, dont just flash and forget, it is part of the fun when you can feel the changes making a positive impact. http://img.photobucket.com/albums/v1...rendy/plot.jpg
Originally Posted by Evo8400
(Post 10839704)
Hi
I an glad you have posted this up as i am in the same position. I have a 2003 WRX which has decat up down and centre pipe and panel filter. I would like to load a prodrive map into the ECU to give approx 265BHP with these mods rather than remap. I understand that Prodrive just used a generic safe map when upgrading the WRX to PPP and did not see the need to map individual vehicles. Failing the above does any one know if you can change the ECU for a PPP unit without affecting the cars security and immobilisation system I am sure this has been debated many times before but cannot find much info on here using the search engine. Have spoken to a fair number of tuners who all want to remap at £500 to £600 with the Vat. I am aware i will need to download software and purchase an OBD to USB cable, any advise on this would be gratefully received. John As for cables , it's either tactrix or a modded vag cable ( see nasioc mad mod cable ) |
That's some amount of timing at the top end there, probably helped by the lower boost.
I have a base map but you'd need a mbc to use it in parallel. |
Thanks Tony and brendy
Just analysing what changes the rom has over standard. Tony did you manage to get a madmod vagcom cable working on a bugeye? The Tactrix cable jsut seems expensive. |
Originally Posted by d4vidh
(Post 10839794)
Thanks Tony and brendy
Just analysing what changes the rom has over standard. Tony did you manage to get a madmod vagcom cable working on a bugeye? The Tactrix cable jsut seems expensive. Not a problem for me as I only work on my car Madjax modded the cable for me £20 exchange If you're gonna get a vag cable to mod you have to make sure it's the right one |
Originally Posted by bluenose172
(Post 10839791)
That's some amount of timing at the top end there, probably helped by the lower boost.
I have a base map but you'd need a mbc to use it in parallel. Saying that, the timing I was running there was running fine with both 95 and super. Those figures were achieved on a td04, full true 3" decat turboback but with stock catted uppipe fitted. Now running Sti pinks, VF24 and classic uppipe so the map has evolved on more. |
PPP Map for 2003 WRX
Originally Posted by toneh
(Post 10839714)
Pm me your email mate ( I can probably help you regarding prodrive ;)
As for cables , it's either tactrix or a modded vag cable ( see nasioc mad mod cable ) |
Originally Posted by d4vidh
(Post 10838740)
Does anyone have an opensource hex base map for the following:
Bugeye 2002 WRX Mods to be fitted: Complete decat 3" Exhaust Panel FIlter Everything else stock. ECU is a A4SE900D (AF531 7555) I have the base map but was wondering if anyone has one with the mods I have listed so I have a basic starting point to go off when above parts are fitted. |
The roms can be in the format of bin or hex files, base rom is basically a starting point rom with which to tweak. Easier just to call them roms.
|
Hi guys very interesting thread, I like the sound of what Evo8400 said about the PPP map where would i be able to download the program/software thats needed? I have an 03 wrx Im new to the subaru tuning scene but this thread seems the way forward with OP mapping never had a car that has been mapped so i am a bit excited, Is this the right way to mod the vag cable thanks in advance.
|
|
|
|
Yes that is the correct way to mod the cable , btw you don't need the orange & white jumper cables , just the fine ones
The hard part is getting the correct vag cable to mod You can get various vag cables that are all correct for vag applications but only one type is suitable for modding to flash Subaru Or you could buy a tactrix |
I just been reading on another forum seen your post on there from april about the cables seems bit hit and miss sadly had a look at tactix unsure what cable would be needed so what about the program used to flash the ecu where would that be downloaded from sorry for being dumb, This cable looks like the one but who knows as it a different colour looks similar to the blue one http://cgi.ebay.com/ws/eBayISAPI.dll...sid=p2992.m753
|
The supplier with the best success rate of supplying the correct cable is
Dx.com in the states catalogue number SKU: 42823 You will need to download ecu flash ( ver 1.32 ) if you're using a modded vag And romraider |
Nice one Toneh :thumb: i will get on the case and order one i forgot to ask if you managed to get the right one in the end obviously you did been busy trying to search on google about the program thats used to do the OP mapping but no had much luck at the moment seen stuff on the tactrix site but i am usure if thats the right software i like the sound of the PPP map is there any thing else thats needed to start doing it safely :wonder:
|
The first thing I would advise is do plenty of reading , researching , asking questions and learn what does what ,and what effect changes in the map make
You really need a wideband 02 to monitor you're afrs ( I don't bother but that's me ) So I have to say if you plan on mapping you're own car get a wb 02 Romraider forum and nasioc are the two best resources for info IMHO |
I have been reading for last hour seems quite complicated in some ways nasioc is a help but fueling is 93ron i use tescos 99ron in my wrx was kind of hoping to find an 03 wrx ppp map 265bhp would be nice as my wrx is basically standard has only got a few mods plus a few bolt on's waiting to be fitted thought thanks for your help :thumb:
|
Originally Posted by djwa
(Post 10868875)
I have been reading for last hour seems quite complicated in some ways nasioc is a help but fueling is 93ron i use tescos 99ron in my wrx was kind of hoping to find an 03 wrx ppp map 265bhp would be nice as my wrx is basically standard has only got a few mods plus a few bolt on's waiting to be fitted thought thanks for your help :thumb:
|
lol, that will be my PPP map doing the rounds then.:lol1:
It's a goos safe map lads, my blob is on 94k and still pulls like a train.:D |
All times are GMT +1. The time now is 03:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands