Window closure on Toad 606
 

Will I be able to set my toad 606 to close any /all windows when I arm the alarm?

Car is a new age blob. I've fiddled with the software settings by using the pin code and fob but no joy. Do I need to buy additional hardware or should the alarm be able to do it out of the box?

Cheers

Daz

Hi Daz

Here is the Manual,hope so help

myweb.tiscali.co.uk/firesoul/toad/ToadAi606Manual.doc

plus have look on this

https://www.scoobynet.com/security-1...l-closure.html

But think you will need Window closure module,which usually cost £40 plus fitting

Jura

I used to have this on one of my old motors and yes if memory serves me right as Jura has said need total closure module.

Also not sure if it's poss on a frameless window - may be talking out my arse here but sure it's the reason didnt then have it installed on my classic.

You can have boot pop though if you have the 4 button fob....and thats always worth it... :)

Most cars can have window closure regardless of window type
some like the Evo you have to go into each door
to check pop out window switch and if there is a big bunch of thick wires
you can do drivers in door and rest inside car where loom comes in from drivers door
if there are not many wires ie data signal then you will have to go in each door

Ian