ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Subaru Parts (https://www.scoobynet.com/subaru-parts-451/)
-   -   2x Y7 ecutek licensed Ecus (https://www.scoobynet.com/subaru-parts-451/948434-2x-y7-ecutek-licensed-ecus.html)

Badger_88 02 September 2012 07:07 PM

2x Y7 ecutek licensed Ecus
 
I have 2x Y7 Ecus, both with ecutek license on.

One is my original 2000 uk turbo ecu, the other one i brought when I was having trouble with my car to see if it solved a spark issue which turned out to be a starter issue drawing too much voltage when being cranked over.

Now my cars sorted and ready for remap I have decided to go for an alcatek ecu.

These ecu's will fit any classics with either an ecu code Y7 or E3

Both these Ecus have been checked over and proved to have the ecutek license and in fully working order by Duncan @ racedynamix. If you want proof I'm sure he would be happy to back this.

ONE LEFT £80 delivered but no ecu case as need to keep it for my simtek

dynamix 03 September 2012 10:12 AM

Both checked and showing as ecutek licenses on them by me.

scooby1982 03 September 2012 10:29 AM

Is the uk year 2000 mate??? As in my00

Badger_88 03 September 2012 09:52 PM


Originally Posted by scooby1982 (Post 10774691)
Is the uk year 2000 mate??? As in my00

Yes :thumb:

chloe123 03 September 2012 11:47 PM

Can these ecus fit classic... Also would the be an issue regarsing the key etc if i was to use this

dollydrifter 04 September 2012 03:01 PM

could i use one on my 1999 uk turbo? and have they just got a base map on them?

Badger_88 04 September 2012 05:41 PM


Originally Posted by chloe123 (Post 10775820)
Can these ecus fit classic... Also would the be an issue regarsing the key etc if i was to use this

Yes they are for a classic. As long as your ecu is a Y7 (code found on the ecu)
No issue with immobiliser as the Ecus are not coded so will work on any car. The immobiliser is a separate unit found under the drivers side dash.

Badger_88 04 September 2012 05:49 PM


Originally Posted by dollydrifter (Post 10776340)
could i use one on my 1999 uk turbo? and have they just got a base map on them?

As long as your ecu code is Y7 yes.
The 2000 uk turbo one was mapped with 440 injectors, k&n, full decat, down pipe & 2.5"exhaust system, front mount, apexi avcr boost controller, Walbro 255 fuel pump, vf35 turbo
The other one I'm unsure of as was brought second hand, but is fully working and licensed.

THESE ECUS WILL WORK IN ANY IMPREZA WITH THE SAME CODE ECU - Y7

LIKE THIS
http://i.ebayimg.com/00/%24(KGrHqMOK...YbhiQ~~_35.JPG

dollydrifter 04 September 2012 05:53 PM

u have a pm :)

Badger_88 04 September 2012 06:54 PM


Originally Posted by dollydrifter (Post 10776528)
u have a pm :)

Replied :thumb:

Badger_88 07 September 2012 07:42 PM

Both still available

Badger_88 10 September 2012 08:09 AM

Bump

littlebit 10 September 2012 09:47 PM

If I got this how much would it cost for Duncan to do a map tweak thank

Badger_88 11 September 2012 07:04 AM

I will wait for Duncan to answer this. I can say that if your ecu has not been mapped before then the ecutek licence is £300 so buying one of these Ecus will save you £150.

Badger_88 12 September 2012 08:52 PM

Bump

Badger_88 15 September 2012 08:37 PM

These ecu's will also work on classics fitted with E3 ecu's

kezwaldo 16 September 2012 11:11 AM

i have a 2000 uk turbo 1999 and my ecu is E3 will this plug straight in thanks.

Badger_88 16 September 2012 07:35 PM

Yes, will plug straight in and work.

Badger_88 22 September 2012 06:57 AM

Price dropped to £125 each including delivery

Danwheeler124 28 September 2012 07:11 PM

Ecu
 
U still sellin the ecus pal? Do u know if theyll fit my 98 impreza wrx import?

Badger_88 28 September 2012 07:29 PM

Yes, still available. Yes will fit your model.
Cheers

Danwheeler124 28 September 2012 09:25 PM

Ecu
 
Ill take one pal 125 posted ye? Pm me how u want me to pay asap pal im away for the weekend from tomorow afternoon til sunday night

Badger_88 28 September 2012 10:04 PM

Sorry my mistake, these ecu's will not fit your car.

V22_SSS 02 October 2012 02:51 PM

Might be interested on the 2000 one just need to wait till end of week ;)

Badger_88 02 October 2012 08:42 PM


Originally Posted by V22_SSS (Post 10811700)
Might be interested on the 2000 one just need to wait till end of week ;)

:thumb:

topshot 02 October 2012 10:09 PM

Would you take £90? License is £150

Rob669 03 October 2012 09:48 AM

You have a PM.

dynamix 03 October 2012 06:04 PM


Originally Posted by topshot (Post 10812393)
Would you take £90? License is £150

License is £150 + vat = £180

Badger_88 08 October 2012 09:47 PM

One sold. The other is now available for £85 but does not include the ecu case as I will need this to put my alcatek into

Badger_88 10 October 2012 09:06 PM


Originally Posted by Badger_88 (Post 10820357)
One sold. The other is now available for £85 but does not include the ecu case as I will need this to put my alcatek into

BUMP GRAB A BARGIN


All times are GMT +1. The time now is 12:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands