|
cdb with 14mm stud conversion
this is my old 2.0l cdb block.it has had the 14mm stud conversion done and the rear thrust crank conversion.has all oil squirters,bores look good but will need a 0.5mm overbore as advised by enginetuner.£300.
http://i336.photobucket.com/albums/n...b500/008-6.jpg http://i336.photobucket.com/albums/n...500/004-14.jpg http://i336.photobucket.com/albums/n...500/007-12.jpg http://i336.photobucket.com/albums/n...500/005-17.jpg http://i336.photobucket.com/albums/n...500/003-20.jpg |
Cheap
Glws arf |
Originally Posted by andyscoobym3
(Post 10648831)
Cheap
Glws arf |
Originally Posted by scubbay
(Post 10648874)
needing rebored it aint that cheap imo
Anyone doing a big power build will want to Bore / Hone the block anyway. I have seen CDB's go fro over 400 in need of a rebore. The 14mm Conversion makes it a Bonus too, I believe that costs around £100 - £150 on it's own.. Making it Very Cheap IMO GLWTS Buddy |
each to their own. Good luck with your sale.
|
as said above,most people buying a cdb even with good standered bores due to the milage most will have covered would bore and hone them before fitting anyway.add to that the 14mm stud conversion and its also had the rear thrust conversion for the crank too which both of them alone will cost more than the block is for sale for,i dont think its too bad a price at all.
|
Good price
|
Free bump for a reputable guy.:thumb:
|
Very cheap !
|
Thats a bargain! It would fetch over 400 on ebay
|
Originally Posted by bigarf
(Post 10649157)
as said above,most people buying a cdb even with good standered bores due to the milage most will have covered would bore and hone them before fitting anyway.add to that the 14mm stud conversion and its also had the rear thrust conversion for the crank too which both of them alone will cost more than the block is for sale for,i dont think its too bad a price at all.
|
How much does a .5 over bore cost roughly? How much is the delivery cost on this?
|
If I was after one of these I would pay that bud stick with it your price is bang on
|
Originally Posted by Reshard1977
(Post 10651094)
How much does a .5 over bore cost roughly? How much is the delivery cost on this?
|
Btt
|
Very cheap. Bump for a great seller. Would have bought this myself if Alan wasn't already building me a 2.35
|
yhpm m8.........
|
Originally Posted by frodobaggins
(Post 10655396)
yhpm m8.........
|
Yhpm
|
Originally Posted by log2
(Post 10655790)
Yhpm
|
Wanna maybe change it for standard CDB?
|
If it's still available I'll have it, pm me your paypal details and I'll arrange collection
|
Sold.
|
| All times are GMT +1. The time now is 12:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands