REVERSE INLET ALTERNATOR TENSIONING BRACKETS
 

ok after doing a few reverse inlets iv decided to design and have cut a few brackets to make it a more of a easy and bolt on job with these brackets you get the full alternator tension you need which is one of the bigger jobs on this conversion


the brackets are designed to fit both classic and newage cars up to hawkeye models iv not tested on the hatch onwards ufortunatly

also the kit is designed to fit both types of alternator/air con mounting brackets that you will use with the conversion this braket it self needs slightly modding to flip the alternator over jsut simply cutting the air con mounting top lugs off and then 5 mm of the meat off the 2 mounting point holes aswell to allow clearence of the brackets to the belt this will take around 10 mins with a trusty grinder and file

after this mod to the alternator bracket this brackets then simply bolt to that some washers will be required for spacing

this brackets not only give you a very good tension system as there is a 2 way adjustment on both the alternator and the middle adjustment bar also this in turn gives great tension adjustment and loweres the belt in the center to allow plenty room where your intercooler pipe will sit so giving plenty room to do so

brackets are in raw finish now but will be powder coated gloss black before sent out we can do 3 other colours also red/white/blue at a small cost extra

only other items you will need it a idle wheel we tend to use a std item off a impreza timing belt which works a treat and of cause a longer alternator belt aswell

2x brackets in black/blue/red/white £40pair

pm me if needed

http://i310.photobucket.com/albums/k...cagreen089.jpg
http://i310.photobucket.com/albums/k...cagreen091.jpg
http://i310.photobucket.com/albums/k...cagreen090.jpg


here a set up we have recent finished brackets are in red so you can see them cleary

http://i310.photobucket.com/albums/k...psa3a060e1.jpg

http://i310.photobucket.com/albums/k...ps0294da40.jpg

http://i310.photobucket.com/albums/k...ps206c66b9.jpg

http://i310.photobucket.com/albums/k...psda2f8742.jpg

http://i310.photobucket.com/albums/k...ps87222516.jpg

Matty could you use one of these to mount a smaller alternator?

No mate I think there is only a Carl davey breaker out ther for the smaller alternators mate these are only the tension brackets mate not the actual mount mate

pm's replied

pm's replied

pm's replied

Hi did you have to put a wedge behind the TB to point it down incase if fouling the bonnet
thanks

what version you running??pm me if needed

You have PM :)

pm replied get some pics up when there fitted :)

all pm's repleid

pm's replied

Pm's replied

pm's replied

pm's replied

pm's replied

pm's replied

Thanks for the quick responce! I sure am excited to get my set:-)

Yes thank you there already on route you have to post pics when fitted:)

Tried ringing and textin with no reply Matty??
Please send me a text on 07926971608 thanks

Sorry fella we been attending rally day all week end were bak to normal now il send a tx now as just on route to get another breaker cheer


All pm's replied and new batch of brackets just done

I recieved my set the other day and I must say they do look nice! I will post a pict once they are on

Excellent they got there quick first set in the USA post pics when you can cheers

pm's replied..more bracekts back in stock

Hi mate have u got any of these left? And can you do it any cheaper if so I'll take a set cheers

we have new stock but sorry the price is the price on these lazer cutting and coating isnt cheap im afraid sorry

Ol die to the popularity of these we have had a new large batch made up now to keep up
With demand due to the large quantity we have had its means the price forte lazer cutting and materials have come down so we can pass that on to you guys and now to the brackets at £40 the pair coated in a colour to suit you we can also offer pre modded and coated alternator brackets for that full bolt on package also we can supply a new puly wheel the same as pictured for £19 new of needed

All pm's replied

pm's replied

Mine turned up today Matt

Thanks
Tim

pm's replied

all pm's replied