My HTA rear Diffuser ive fitted on my Bug
 

A pic of my HTA rear diffuser that ive fitted, i bit tricky doing it on my own but very pleased overall with the new look :norty:
http://i1123.photobucket.com/albums/...n/IMG_0966.jpg">

looks well , but i cant justify the price unfortunatly. Ever since i got my scoob i've wanted something there.

HTA do a smaller cheaper one that just fits in the middle for about £80 mate

Splitter's looking good:thumb:

Nice, would like to get one myself.

Fitted mine the other day, did you find yourself with the choice of having it ride too high up the middle or not meeting on the right corner aswell?

it doesnt look like its fitted correctly to me, looks bowed in the centre.

At first I put it down to maybe my bumper was mis-shapen, but seeing that makes me thinks HT's original is out.
Diffuser fitted the other way so centre lines up:
http://i602.photobucket.com/albums/t...h_DSCF0339.jpg
Notice the bulge conveniently pinpointed by the TOW sticker :)
This will pull up when I add a small nut and bolt just to the right of the fin, but having purchased their v limited splitter and being very happy with it expected something better than this for the money.

id rather have no difusser if the fit is like that. are you sure its on correctly?

It ain't bowed mate it's just the angle of the photo

Yes mate I agree the right hand corner has been moulded to the wrong angle !
It all lines up apart from that corner and no matter what you do you there is always a gap, I wasn't happy with how it looked so i masked up both sides of the diffuser and sealed all the edges and filled any gaps with black Sikaflex.
Now you can't tell and it looks all flush against the bumper

Sorry but I have to agree with the above, it looks on the pi$$ fitted to far forward in the middle and down on the right you can see more of the diffuser's underneath if that makes sense.

Fitted one to my old mk1 type 25 and the fit was spot on.

Can you pop a few more pics up

I will put more pics on to show it is on properly !
I spent enough time on it getting it right and level due to the incorrect angle of the corner moulding

if i was designing a difuser , it would sit like this -

http://i1199.photobucket.com/albums/...f/IMG_0966.jpg

Cheers Charly 😉

Lol , it wasnt a compliment , i drew an outline of where i thought it should sit. I would ask HTA if its maybe warped ? Whats it sit like in the add ?

I messaged them about mine just 5 minutes ago, from trying to fit mine I would say the holes and or cut stencil were misaligned.

It definately is a poor fit with the wrong angle for the r/h side but with perseverance and some engineering I have got it fitted level and even on both sides, it's the angle of how the picture was taken that makes it look out. If I get chance I'll take a better pic tomorrow

No mate, ref your outline I wouldn't want it to sit that high up anyway, the add pic is showing it situated the same as mine. I had to rework it but I'm happy with the finished look !

Fair enough m8. I had been looking at one of these since i got my bug and wondered what they look like.

another pic of mine showing that it is level boths sides and the original HTA listing pic
http://i1123.photobucket.com/albums/...n/IMG_0980.jpg"> HTA listing pic
http://i1123.photobucket.com/albums/...n/IMG_0940.jpg">