97 shed warrier!
Hi all, Love the project section of this site, the big guns like JGM and AF are breath taking, but its the normal do it your self guys i admire, (sorry for your bad luck daz davies) so after having a heavy frontal in my 97 STI i decided to give it a go myself using you guys finished cars as inspiration.
My shell was pretty much scrap but all running gear was ok, i managed to track down a 97 mcrea edition with four doors two wings rear window, front and rear subframes and loom, it was pretty much gutted other than that but thats all I needed really. I started by taking every thing out of shell execpt for the rear screen, turned it up on its side in the yard! seam welded the jacking points and front turrets for strength, I then wax oiled the chassis legs on the inside with a kit I got from Halfords, undersealed the lot while all suspension and subframes were away getting shotblasted and etch primed, i then 2pac painted the whole inside,engine bay and boot with 203 white, gloss black for subframes and got pink mixed up (by giving them toy phone) for trailing arms etc. http://i1248.photobucket.com/albums/...uild_eh012.jpg http://i1248.photobucket.com/albums/...uild_eh011.jpg http://i1248.photobucket.com/albums/...uild_eh010.jpg http://i1248.photobucket.com/albums/...uild_eh002.jpg http://i1248.photobucket.com/albums/...uild_eh028.jpg painted as many parts in shed as I could think off while car was outside, so i wouldnt destroy my lovely white paint with black and pink over spray! Brake servo painted and fitted http://i1248.photobucket.com/albums/...uild_eh006.jpg http://i1248.photobucket.com/albums/...uild_eh005.jpg http://i1248.photobucket.com/albums/...uild_eh004.jpg Started on inside by fitting Handbreak and sound mat. http://i1248.photobucket.com/albums/...uild_eh009.jpg http://i1248.photobucket.com/albums/...uild_eh008.jpg Next was refitting the loom :wonder: http://i1248.photobucket.com/albums/...uild_eh021.jpg http://i1248.photobucket.com/albums/...uild_eh020.jpg http://i1248.photobucket.com/albums/...uild_eh022.jpg As I had to take parts from my doner car to fit on the project car, i could examine clean, polish, paint or modify before refitting. mindfull I was on a budget!! next was fuel tank painted with hammerite, fuel neck etch primed and fresh coat of silver applied as corrision was pretty bad on these. next on was the subframes. http://i1248.photobucket.com/albums/...uild_eh014.jpg http://i1248.photobucket.com/albums/...uild_eh013.jpg http://i1248.photobucket.com/albums/...uild_eh024.jpg http://i1248.photobucket.com/albums/...uild_eh023.jpg |
nice work chap, looks a good project.
|
Very nice!
|
lookin like a good 'un!!
|
Looking good buddy :) Good luck :thumb:
|
:cool:looks good, always wanted to do this myself, keep up the good work,
|
Nice work mate. :thumb:
|
Looking great, there's something about that white, so clean!
|
Great work
|
nice work mate keep pics coming
|
Awesome pictures mate keep posting. Good luck
|
Very nice bud! Keep up the good work
|
97 shed warrier!
Thanks For the comments guys :thumb:
another bracket painted and fitted http://i1248.photobucket.com/albums/...uild_eh017.jpg http://i1248.photobucket.com/albums/...uild_eh019.jpg http://i1248.photobucket.com/albums/...uild_eh018.jpg Wiper motor cleaned and painted http://i1248.photobucket.com/albums/...uild_eh025.jpg Picked up a combo pack of anodised bolts from probolt for anything visable going back in, found if you want and order an exact size it works out very expensive, but if you get the combo pack you can cut them down to suit at a fraction of the cost http://i1248.photobucket.com/albums/...uild_eh029.jpg Cleaned and painted the diff http://i1248.photobucket.com/albums/...uild_eh026.jpg only polished the bottem half of the cover, as the top section cant be seen, have some titanium bolts for it as you can see the diff when fitted from behind, thought the ring of blue nuts would look good, bit anal I know.:cuckoo: http://i1248.photobucket.com/albums/...uild_eh027.jpg Charcoal canester bracket before and after. http://i1248.photobucket.com/albums/...uild_eh037.jpg http://i1248.photobucket.com/albums/...uild_eh038.jpg Few more suspension goodies to go on! http://i1248.photobucket.com/albums/...uild_eh033.jpg http://i1248.photobucket.com/albums/...uild_eh031.jpg Degrease, powerhose and paint the gearbox, longterm is to convert to six speed, but have a long shopping list, and the box is down toward the end. http://i1248.photobucket.com/albums/...uild_eh030.jpg http://i1248.photobucket.com/albums/...uild_eh032.jpg new pads all round, new discs for the front, but got the back ones resurfaced, then painted. http://i1248.photobucket.com/albums/...uild_eh034.jpg http://i1248.photobucket.com/albums/...uild_eh035.jpg |
How did you deal with the different thread pitch that jap imprezas seem to have ?
|
i must say mate, you work there looks fantastic quality.......
great pics also :thumb: |
making of a good thread buck,fair play even if it was overdue
|
97 shed warrier!
Thanks guys, dont understand the pitch question lad sorry, both the doner car and the new shell are both 97 sti jdm cars, so every thing is a straight swap.
Thanks Gordon, pretty slow on key board lad, pecking at it like a chicken! |
great work mate
love the "home builds" |
this looks stunning mate, looking forward to seeing the rest
|
97 shed warrier!
Thanks again guys for the comments and support :luxhello:
Got doner engine out and into shed. http://i1248.photobucket.com/albums/...uild_eh041.jpg http://i1248.photobucket.com/albums/...uild_eh042.jpg Time to tackle the front calipers as big brakes are not in the budget, they were working fine but I got a recon kit from the main dealer and just as well, when I broke them down the pistins were badly rusted. http://i1248.photobucket.com/albums/...uild_eh045.jpg http://i1248.photobucket.com/albums/...uild_eh047.jpg Rubbed them down with emery paper and machine oil and they came up perfect. while I had them split I went over trhem with a drill and wire brush, then reassembled the lot. http://i1248.photobucket.com/albums/...uild_eh043.jpg http://i1248.photobucket.com/albums/...uild_eh044.jpg Then back into Halfords for some caliper paint, should have shares in the place before this is finished!! http://i1248.photobucket.com/albums/...uild_eh061.jpg http://i1248.photobucket.com/albums/...uild_eh060.jpg My self and my mate Stevo gathered up what ever scrap lengths off steel I had about the shed and put togther a engine stand. Bit like myself, dosent look great but it does the job!!:lol1: http://i1248.photobucket.com/albums/...uild_eh054.jpg http://i1248.photobucket.com/albums/...uild_eh055.jpg |
like you say does the job
and very handy bit of bit of equipment mate |
97 shed warrier!
Two front discs and pads arrived, straight on with braded hoses and dot 5.1 fluid, bleed them out and I have a rolling chassis!
http://i1248.photobucket.com/albums/...uild_eh090.jpg http://i1248.photobucket.com/albums/...uild_eh091.jpg Next up was the body work, my thoughts were to keep it simple, no lairy spoilers or body kits, just nice and clean. we rubbed the whole car down and filled and sanded what ever we could find, fergus the big bro was the main man on this part of the build as he has some expierience in this field. Thanks for all your help lad. http://i1248.photobucket.com/albums/...uild_eh040.jpg http://i1248.photobucket.com/albums/...uild_eh057.jpg Not to mention the o neil boys, Gordon and noel, thanks lads http://i1248.photobucket.com/albums/...uild_eh059.jpg Test fitted the front mount ( a hundred times!!) and Trimmed ver 5 front bumper to suit http://i1248.photobucket.com/albums/...uild_eh063.jpg http://i1248.photobucket.com/albums/...uild_eh064.jpg http://i1248.photobucket.com/albums/...uild_eh065.jpg http://i1248.photobucket.com/albums/...uild_eh066.jpg http://i1248.photobucket.com/albums/...uild_eh067.jpg We welded up the rear boot lock and aerial holes and sent the lot off to the body shop for a fresh coat of paint, I was lucky to find a local guy that took on the job considering the car was still in parts so was messy to take in as it took up a nice bit of space, I also left him in the alloys as I thought all white including wheels will be a nice look. Time to tackle the million other jobs that need doing!! First was the inlet manifold, paint off, clean, prime with etch primer then vht black wrinkle paint http://i1248.photobucket.com/albums/...uild_eh068.jpg http://i1248.photobucket.com/albums/...uild_eh069.jpg http://i1248.photobucket.com/albums/...uild_eh071.jpg http://i1248.photobucket.com/albums/...uild_eh072.jpg http://i1248.photobucket.com/albums/...uild_eh073.jpg http://i1248.photobucket.com/albums/...uild_eh081.jpg http://i1248.photobucket.com/albums/...uild_eh082.jpg http://i1248.photobucket.com/albums/...uild_eh083.jpg Throttle body cleaned and new gasket http://i1248.photobucket.com/albums/...uild_eh085.jpg Idle control valve cleaned and new gasket http://i1248.photobucket.com/albums/...uild_eh084.jpg All bolted back together :luxhello: http://i1248.photobucket.com/albums/...uild_eh086.jpg |
97 shed warrier!
Did a recon job on the ac unit but as of yet havent put it on the car:cuckoo:
http://i1248.photobucket.com/albums/...uild_eh074.jpg http://i1248.photobucket.com/albums/...uild_eh075.jpg http://i1248.photobucket.com/albums/...uild_eh076.jpg http://i1248.photobucket.com/albums/...uild_eh077.jpg http://i1248.photobucket.com/albums/...uild_eh078.jpg http://i1248.photobucket.com/albums/...uild_eh079.jpg The lovely Ciara C working hard, cos she likes to help me.... and def not for phone credit!! ;) http://i1248.photobucket.com/albums/...uild_eh070.jpg The bro sold this lovely wagon to John M then had some kind of a mid life crisis with toyota before returning to the brotherhood :thumb: http://i1248.photobucket.com/albums/...uild_eh104.jpg http://i1248.photobucket.com/albums/...uild_eh105.jpg http://i1248.photobucket.com/albums/...uild_eh106.jpg The afore mentioned John M stopping mt toolbox floating away!:lol1: http://i1248.photobucket.com/albums/...uild_eh062.jpg Couldnt get the centre guage pod that replaces the air vents as they are discontinued, so I made my own. First job unscrew the vents from behind then cut out the plastic bar thats left in the middle. http://i1248.photobucket.com/albums/...uild_eh109.jpg The prosport guages I got came with their own shrouds, I sat them into the ope facing toward the driver slightly, had to notch out top and bottom a small bit so they sat even, but when was happy dropped in some glue just to hold them long enough to back them up with fiberglass. http://i1248.photobucket.com/albums/...uild_eh115.jpg http://i1248.photobucket.com/albums/...uild_eh116.jpg http://i1248.photobucket.com/albums/...uild_eh117.jpg http://i1248.photobucket.com/albums/...uild_eh118.jpg http://i1248.photobucket.com/albums/...uild_eh119.jpg Then when it went off filled it in with normal auto filler. http://i1248.photobucket.com/albums/...uild_eh120.jpg Red lad sanding it out with the dremel, was pretty tough to get a nice finish between the pods as there wasnt a lot of room http://i1248.photobucket.com/albums/...uild_eh121.jpg http://i1248.photobucket.com/albums/...uild_eh123.jpg http://i1248.photobucket.com/albums/...uild_eh124.jpg Some filler primer just to take any imperfections out. http://i1248.photobucket.com/albums/...uild_eh125.jpg |
Looking good. Some nice mods there!
|
Great work :)
|
likimg the look of pod heater controls bud
|
looking good er love the way this thread is coming together
|
Paint those Braketech bells as they rust bad :( nice thread :)
|
Great work lad, love these trends what part of ireland are you from ? love the paint work.
|
All times are GMT +1. The time now is 12:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands