ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   APS 3.5" exhaust gasket help (https://www.scoobynet.com/general-technical-10/924703-aps-3-5-exhaust-gasket-help.html)

barnshaw 11 February 2012 06:13 PM

APS 3.5" exhaust gasket help
 
hello, i have the above system on my newage sti, i have noticed both joins on the flanges are blowing a bit so i need replacement gaskets, problem i am having is i have been searching high and low for a 3.5" diameter 2 bolt gasket but cannot find any UK suppliers!!??

is there anyone who has had a similar problem or know anyone in south east region who can make a couple up and fit? this might sound stupid but is making an exhaust gasket something a decent exhaust company will do?

cheers

barnshaw 11 February 2012 06:13 PM

also just to add to this how much does a blowing exhaust affect performance?

Rob-S 11 February 2012 07:03 PM

I had the same problem trying to get a gasket. You can buy a sheet of gasket material on fleabay and use your old one as a template.

barnshaw 11 February 2012 07:12 PM

thanks rob, i suspected this may be the only option!

TomKswe 11 February 2012 07:22 PM

I got the same problem searched all over but no luck.
But later found out that my tuner PBZ in Sweden got 3,5" copper gaskets.
www.pbz.se send an email and get a shipping quote.

I by stuff from UK all the time and the shipping is really cheap. So it should be the same from Sweden.

barnshaw 15 February 2012 06:49 PM

hello all, thought i would update this thread, more so for anyone else searching the future who might have the same problem as me! managed to finally source the genuine APS gaskets, they were the last set in the UK! i have taken a photocopy of them though and put the dimensions on as below should anyone else ever need them or to make their own gaskets and not go through the hassle i have had to!

Downpipe gasket

http://i119.photobucket.com/albums/o...120215_001.jpg

centre pipe gaskets

http://i119.photobucket.com/albums/o...120215_002.jpg

hopefully this might help someone , somewhere, some day

ShotgunUK 22 March 2013 02:42 PM

Thanks for the info mate - where did you get yours?

barnshaw 23 March 2013 09:58 AM

Got them from ds automotives, what one are you after, i still have the downpipe one

zakscooby1 28 March 2013 04:47 PM

Long shot
Can anyone point in right direction,can I get a downpipe and centre section gasket for my aps system?
Need one ASAP
Thanks

TomKswe 28 March 2013 08:48 PM


Originally Posted by zakscooby1 (Post 11039755)
Long shot
Can anyone point in right direction,can I get a downpipe and centre section gasket for my aps system?
Need one ASAP
Thanks

As I wrote earlier, PBZ can supply gaskets in copper. They have it on the shelf and the advantage of copper is that they keep forever. Send them an email.
Info@pbz.se

I got the same gasket and they are great!

360ste 28 March 2013 09:07 PM

DSautomotive in Aylesbury are the main APS dealer in the UK, as far as I am aware.

http://www.dsautomotives.co.uk/pages...stockists.html


All times are GMT +1. The time now is 06:12 AM.


© 2024 MH Sub I, LLC dba Internet Brands