cosworth belt kit , cometic ,o/d block & engine ,v3 sti crank , acl and other bits :)
 

recently purchased for a project but going going different route ;)


PICS ADDED !!!!!!!!!!!!


v3 sti centre thrust crank ( checked for size and balance by engine services rosewell ) £150 no scores / burn marks etc straight and never seen a grind genuine GOOD crank

full cosworth timing belt kit :
(SOLD )



cometic 5 layer mls 1.6mm head gasket x2 also new and untouched £100

set of ajusa standard headbolts to fit v1 to v4 £25 also new

acl duraglide bearingsgood for up to 500bhp ( standard size ) mains and big ends £80
main bearings ej16,ej18,ej20,ej22 and ej25 centre thrust ( no3 position )
big end bearings ej16 ,ej18 , ej20 , ej22 and ej25 with 52mm crank journal

v3 short block , very good bores ( open deck ) removed from running car with head gasket problem , upon inspection 1 big end conrod bearing has very slight play but was not knocking ?
would assume only good with a bearing change £50

oil pump removed from running car with good oil pressure £20

long block removed from catalunya , bottom end knocking £90 ono comes with block and heads still bolted together

http://i1135.photobucket.com/albums/...i/IMAG0296.jpg
http://i1135.photobucket.com/albums/...i/IMAG0295.jpg
http://i1135.photobucket.com/albums/...i/IMAG0294.jpg
http://i1135.photobucket.com/albums/...i/IMAG0293.jpg
http://i1135.photobucket.com/albums/...i/IMAG0292.jpg
http://i1135.photobucket.com/albums/...IMAG0291-1.jpg
http://i1135.photobucket.com/albums/...i/IMAG0290.jpg

hey mate

were abouts in scotland are you mate? HG set im after bud..

It's "gingerscoob" of SS.net

Thanks

Tom

If you will do the Head Gaskets and the Cosworth Timing belt kit for £290 delivered then I'll take them. Payal or Bank Transfer?

pmd mate :)

Russel, always one for the bargin eh lol:razz:

still awaiting your reply mate ?

pics added :)

tensioner kit prov sold

timing belt still availbale

bump , nobody interested ?

PM me a price on just the belt pls.

I'm also interested in just the belt

have pm'd u both

Cheers for that

no prob matey :D

hey bud are the idle wheels still available ?? if so how much posted to hp3 hertfordshire needed asap thanks ..

no mate they are sold , need to update thread sorry

hi have you still got the acl bearings ? i will have to check the crank journal
size tomoz ..

yes mate

are head gaskets gone pm me cheers

Hello mate
Are the head gaskets still for sale?

pmd

Where did you get the Cosworth timing belt kit from and are the idlers/tensioners OE ones?
Thanks :)

theyre sold mate

I am aware, just asking where I can buy a set :)

ahhh ra motorsport in perth mate ;)

Cheers! :)