447 BHP Classic for sale. £5000 SOLD SOLD SOLD
 

soldcar went last night, am proper sad now, miss it all ready,


http://i1100.photobucket.com/albums/...e/IMG_1550.jpg


Hi,

This car i bought from scooby net back in August, Thread below

https://www.scoobynet.com/subaru-444...p-classic.html

Since owning the car ive done a few bits like new pads, coils, HT leads, services's, clucth, remap with bob rawle ect

THE SPEC

Closed deck block
New under piston oil squirters
Wiseco 92.5mm forged pistons
Manley forged H beam rods
STI V3 heads polished and ported
3 angle valve seats
Supertach valve stem oil seals
Brand new API supplied genuine subaru V4 STi crankshaft
ARP head bolts and rod bolts
Cometic 1.3mm head gaskets
ACL race spec big end and main bearings
RCM modified oil pump
740cc injectors
Parallel fuel rail conversion using stainless steel braided hoses
Sard FPR
Forge dump valve
MD321T turbo with custom 3" intake and air filter
RCM headers, heat wrapped
Harveys special up-pipe, heat wrapped
HKS 3" bell mouthed decat downpipe
HKS silent hi power 3" exhaust system and backbox
Autobahn88 FMIC with custom candy red pipework
Magnecor 8.5mm HT Leads
Mocom Racing oil catch can
Underdrive pulleys
Blue autobahn 88 silicone hose kit (coolant)
PPG straight cut gearbox in a P1 housing with kazz plated front diff
Exedy API clutch and API lightened flywheel
P1 rear diff and drive shafts
Redline shock proof gear oil
whiteline drop links
pink powder coated anti roll bar
cusco front H brace
STI carbon fibre strut brace
Hard race uprated engine mounts and transmission mounts including the dog bone gearbox mount
MAC 3 port boost solenoid
NGK PFR7B with gap down to .65mm
Silkolene Pro S 10w50 oil
Bilstein prodrive suspension.
Rota torque alloys with TOYO T1R tyres.
Autronic SM4 ecu with antilag (off) and launch control (on) (removes the MAF)
Car mapped by B Rawle
D2 8 piston braked calipers and 330mm discs
STI V6 carbon fibre rear spoiler
PIAA wipers
STi ally bonnet (much lighter than uk steel version)
Jap spec water bottle
RCM carbon bonnet vent
Guages & pod - boost, water, oil

NOW THE BAD BIT !!!
i was driving before christmas and floored it in 5th gear which isnt a uprated gear and dosnt wine, well any way it blew, I think its the bearings and as a result i have no 1st 5th and reverse gears.

The car has sat for two months and i just cant seem to get the money to repair so i am selling.

I paid£7000 so i was hoping for £5000 back,

http://i1100.photobucket.com/albums/...e/IMG_1548.jpg

http://i1100.photobucket.com/albums/...e/IMG_1551.jpg

http://i1100.photobucket.com/albums/...e/IMG_1557.jpg

http://i1100.photobucket.com/albums/...e/IMG_1556.jpg

http://i1100.photobucket.com/albums/...e/IMG_1549.jpg

http://i1100.photobucket.com/albums/...e/IMG_1553.jpg

http://i1100.photobucket.com/albums/...e/IMG_1554.jpg

http://i1100.photobucket.com/albums/...e/IMG_1555.jpg

5k+2k window for 6 speet up seems reasonable.

GLWTS

yhm

Probably worth mentioning the car lives in dagenham Essex

more pics and vids

http://i1100.photobucket.com/albums/...e/P1040260.jpg
http://i1100.photobucket.com/albums/...e/P1040257.jpg
http://i1100.photobucket.com/albums/...e/P1040259.jpg

VIDEOS
http://s1100.photobucket.com/albums/...t=IMG_1738.mp4


[/url]http://s1100.photobucket.com/albums/...t=IMG_1529.mp4

DISCLAIMER : the person driving in these videos is now living the rest of his life in Australia, and will never be returning back to the UK

The video is the only time i ever launched the car, and i didnt even use launch control .

TX's old car and its a good'un

FUD be worth a punt, swap it all over ;-)

ive asked buddy :) lol

It's worth more in parts!

Dont have the tools, space ect to break car up

.........
 

What you waiting for then kidda buy it break it :)

Was the engine issue sorted that i read about in previous posts usuing water ect .

If so what was the issue and who did the work ?


Regards
fud.

yer the problem was the head gasket was slightly damaged, i had both gaskets replaced with the same as the origanal ceramic ones, the heads were skimmed and all works carried out by Rich @ Fbtunning,

ok exlnt ..

id love to get my baby back :( hard to beat the sound of the ppg and the md321t chirping away there. Gorgeous

Did you see my videos ?

The debris from the 5th gear will be stopping you selecting 1st and reverse, I did exactly the same thing and drove all the way back from to leeds in 4th with a blitz nur spec :freak3: All the other gears worked fine bar 5th that was not there anymore :lol1:

Replaced 5th gear and it was good as gold again :thumb:

How much to have one gear replaced ?

Most of it was labour, will see if i can find the receipt

yeah dooda watched the vids, brings back so many fun memories :) of dark cold nights locked in a garage with mates building this beast :)

I would drain the oil and flush it through with some fresh cheap oil and see if you can recover 1st and reverse :) at least then you can move it about (not on the road) but to repair and onto a lowloader :) I was going to do the same but had it trailered in the end :)

£5k is nuts dooda, do all you can to keep for that price.

TX.

It cost a LOT more than 5k just to build it lol

it is nuts but its just sitting on my drive, ive only done 3 and half thousand miles since i bought it and i cant afford to repair it.

http://i1100.photobucket.com/albums/...e/IMG_2186.jpg

Lots of paperwork included, MOT till june and tax till may,

yer you bult a awesome machine

Looks and sounds an awsome car , how much would it cost to repair (any quotes)or what would it cost and be safer to convert to a 6 speed?

So, is this for sale m8 or you trying a repair?

Send him a PM fella, still for sale afaik.

TX.

Get it bought Neil :thumb:

yer i was told beyween 1200 to 1500 would buy me a second hand six speed, and then fitting costs, so i suppose 2 k all in ?