Oil catch tank
 

Hi evryone,
I need an oil catch tank for my 96 STI. Do I go for the cheapest on EBAY at £25 delivered or do I need something better. To my mind any container to hold oil etc will be good enough, but any recommendation appreciated. Thanks.

3 port catch can with wide enough ports.

To do it properly you want a can with three inlet ports, an outlet breather and a return to sump.

Best bet is a 3 port system with breather system.

I was recommended by a few sources to not set my system up to return to sump unless the car is used more so for track time due to water/condensation building up on the oil and being returned into the sump.

Best one is the RCM complete kit, expensive but the best!

Same as above, u must get 3 port or its a waste of money. Also agreed that the RCM is the best, but this:

http://www.obpltd.com/obp-shop/alloy...?keyword=catch

is virtually identical at a fraction of the cost. I've got one of these and they're brill

Contact Clive@MadHammer here,he made Subaru specific catch tank for good price

Jura

If it's a v5/6 RCM oil catch tank comEs as a complete kit with everything you need to fit. All hose, fittings cable ties etc!

You might be able to get a generic catch tank on it's own cheap, but rcm's is a complete kit made specific for that vehicle.

This was a group buy, I was on the list second time around. I think he stopped the group buy due to lack of buyers

Thanks evryone for your advice. Iv ordered a 3 port one as recommended, but not sure wether to vent it through a breather or return to sump. I mostly use It on the road & the odd track day. Thanks.

Got a 2 port on my newage & works a treat! Catching all the oil & no oil in the intake or intercooler pipes.