WRX STI Turbo Timer
Hi All,
Hopefully someone can help us :) We have a Subaru Impreza WRX STI 1999 jap import and currently in the process of installing a turbo timer , We have the harness but we need to know where the 3 wires go from the brain Grey Brown Blue can someone please help us Thanks Sarah :thumb: |
Which turbo timer?
|
Originally Posted by Kas Spec C
(Post 10336288)
Which turbo timer?
Thanks :) |
What car is it going onto & where did you buy the harness from?
|
Originally Posted by Kas Spec C
(Post 10336307)
What car is it going onto & where did you buy the harness from?
Engine code EJ20 Harness is this http://www.ebay.co.uk/itm/2708441097...84.m1439.l2649 Timer is this http://www.ebay.co.uk/itm/2807585483...84.m1439.l2649 Thanks |
grey-handbrake
brown-rpm blue-vehicle speed |
Originally Posted by 10bats
(Post 10336333)
grey-handbrake
brown-rpm blue-vehicle speed Thanks |
As above but thats only if you want the turbo timer to display speed, rev & warnings etc.
|
Originally Posted by Kas Spec C
(Post 10336351)
As above but thats only if you want the turbo timer to display speed, rev & warnings etc.
As its being installed might as well install it properly we did have the option of the type 0 timer but as the type 1 displayed speed we chose that one Thanks |
Check this out http://web-nine.com/projects/wrx/turbotimer/
|
handbrake wire from handbrake or rear of dash,
rpm on ecu or rear of dash, speedo on ecu 0r rear of dash. cant remember colours. |
Originally Posted by Kas Spec C
(Post 10336357)
Check this out http://web-nine.com/projects/wrx/turbotimer/
Thanks , Our car is different to that Ours is the Classic 99 WRX STI Jap Import.... |
what is engine code? EJ20 what, need next letter.
|
You really don't need one fitting, 1 minute of gentle driving does the same thing, of your car is still in kmh then your better off spending the money getting it converted and checked to see what else needs doing properly :)
Tony:) |
Originally Posted by 10bats
(Post 10336430)
what is engine code? EJ20 what, need next letter.
Thanks :thumb: |
Will post info tomorrow am home now
|
Originally Posted by 10bats
(Post 10336932)
Will post info tomorrow am home now
|
|
Originally Posted by 10bats
(Post 10337762)
were is that located? Also to install the harness do i need to take the dash out ? ive currently got my plastic cover off around the steering columb thanks |
ecu is under footwell on passenger side, under metal plate.
better to remove drivers side under dash for fitting the loom. |
All times are GMT +1. The time now is 04:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands