ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Lighting and Other Electrical (https://www.scoobynet.com/lighting-and-other-electrical-14/)
-   -   2004 wrx wont start!! key fob not working. HELP!! (https://www.scoobynet.com/lighting-and-other-electrical-14/903945-2004-wrx-wont-start-key-fob-not-working-help.html)

joshua88 02 September 2011 04:28 PM

2004 wrx wont start!! key fob not working. HELP!!
 
Cars been sat for a while on the drive and now the key fob isn't working so I can't open the door (I can manually) and can't turn the immobiliser off :/ so the car won't start....help

tried a new battery for the key fob today (could need recoding)
was thinking it could be the car batterey!? jump start maybe!? i dont no anything about subaru`s or places/dealers/mehaincs.

please help

im located in surrey :/

Flaps 02 September 2011 04:58 PM

What happens when you get into the car and try the ignition? Lights?
Is the clock (in the centre of the dash bright or dull?)
There is a keypad by your right knee if I remember correctly, there are some codes in the car manual, maybe have a look in there to see if you can switch the imobiliser off?

joshua88 02 September 2011 09:25 PM


Originally Posted by Flaps (Post 10216493)
What happens when you get into the car and try the ignition? Lights?
Is the clock (in the centre of the dash bright or dull?)
There is a keypad by your left knee if I remember correctly, there are some codes in the car manual, maybe have a look in there to see if you can switch the imobiliser off?

Nothing is on or working even when I turn the ignition on, theres a code in the manual which works by turning ignition on and off a number of times. Will get some jump leads tomorrow

Wilky_Boy 03 September 2011 10:05 AM

Mate, I have a 2004 WRX and had exactly the same problem yesterday !!!!!!! I bought a new battery for my fob but it still didn't work !!! In the end I re-programmed the alarm to recognise the two fobs ( using your PIN and the number pad ). It all works fine now. Worth a try maybe ? Takes about 30 seconds mate ... oh and you can use the code to turn off the immobiliser too !

joshua88 03 September 2011 10:38 AM


Originally Posted by Wilky_Boy (Post 10217392)
Mate, I have a 2004 WRX and had exactly the same problem yesterday !!!!!!! I bought a new battery for my fob but it still didn't work !!! In the end I re-programmed the alarm to recognise the two fobs ( using your PIN and the number pad ). It all works fine now. Worth a try maybe ? Takes about 30 seconds mate ... oh and you
can use the code to turn off the
immobiliser too !

Cheers fella will give that a go this afternoon. Was it nothing to do with your car battery then ?

joshua88 03 September 2011 01:51 PM

Just tried the on/off ignition thing and nothing is working still. Were is the key pad to enter codes

BlueBridge Subaru 03 September 2011 02:02 PM

nothing working even with jump leads on ???????? Sounds like you have a main fuse blown in the engine bay fuse box .

Wilky_Boy 03 September 2011 02:35 PM

Hi mate, the problem with mine was deffo the fob. I unlocked it with the key, but it wouldn't start. The car battery was fine though. Do you get the ignition lights on when you turn the key ? Or is there nothing at all ? The keypad for the alarm is to the right of where your knee would be if you were sat in the drivers seat. It sort of pulls down ..... underneath where your fog light switches are ..... once you can see it you just enter in your PIN and this turns the immobiliser off and you can start the car.


All times are GMT +1. The time now is 02:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands