oops ! sorry scoob !
this morning i woke up nice and early to work on my scoob :D
i fitted new heat shield & induction kit it was absolutely boiling outside , but thought while im out ill put my gutter strips back in ? " i'd removed them because was going to carbon wrap my roof " but they would not go back properly as id broken a few of the clips when i removed them :razz: anyway i was gettin hotter and hotter , more and more frustrated and so ...................i kind of...........................punched my scoob :eek:i then stood in disbelief staring at 4 nuckle dents above the rear door :cry: i pulled back the roof lining to see if i could get access to the back of dent to maybe knock out ? but no chance !!! now got to fill and repaint it and hope i can t-cut to a decent finish ?? temper,temper :rolleyes: |
I'd get anger management classes before you end up with a banger ;)
|
You big meenie picking on a poor defenceless scoob :)
|
I had my brand new Bug WRX about 5 minutes and popped the bonnet to have a look and then close it again, dropped it a couple of times from about a foot and it wouldn't close so I decided to help it on it's way with a bit of a push...............dented the bonnet :(
Shaun |
Originally Posted by Midlife......
(Post 10108011)
I had my brand new Bug WRX about 5 minutes and popped the bonnet to have a look and then close it again, dropped it a couple of times from about a foot and it wouldn't close so I decided to help it on it's way with a bit of a push...............dented the bonnet :(
Shaun |
Originally Posted by Midlife......
(Post 10108011)
I had my brand new Bug WRX about 5 minutes and popped the bonnet to have a look and then close it again, dropped it a couple of times from about a foot and it wouldn't close so I decided to help it on it's way with a bit of a push...............dented the bonnet :(
Shaun |
those paintless dent removal guys can fix shallow dents like that as long as they can get behind.
lot cheaper than painting |
They don't even need to get behind the dent anymore. They glue little tiny pins to the body and pull the dent out. Pin is then removed leaving no marks what so ever.
|
Get them to fit your roof rails as well saves the stress of it all
|
some pics of the repair if anyone interested ? sill need to get colour matched , laquer and mop :D that will teach me to loose my temper :brickwall
http://i1091.photobucket.com/albums/...1309614583.jpg http://i1091.photobucket.com/albums/...1309614655.jpg http://i1091.photobucket.com/albums/...1309614705.jpg [IMG]http://i1091.photobucket.com/albums/i399/initiald82 /1309614769.jpg[/IMG] http://i1091.photobucket.com/albums/...1309614836.jpg |
Originally Posted by Paulo P
(Post 10108038)
That's why I always drop bonnets, that and the fact that it makes SwissTony cry :D
You wouldn't shut your door by pushing it to and then closing it with a further nudge.:D |
Originally Posted by Einstein RA
(Post 10116540)
Why do people push bonnets?:confused:
You wouldn't shut your door by pushing it to and then closing it with a further nudge.:D I told him the next time he drops my bonnet I will be drop kicking him :mad::D |
Originally Posted by SwissTony
(Post 10116545)
He is just nasty like that maz, as he just likes to see me wince everytime he drops it from about 4 feet !!!
I told him the next time he drops my bonnet I will be drop kicking him :mad::D |
dont think you will be doing that again.
The colour is 02c which you can get online and poured into a rattler so you can finish the job yourself |
i get the paint made while i wait at halfords . but if anyone does this always ask them to spray it to see if it works ?? because from my personal experiance 9 out of 10 people that work at halfords are useless !!! and ive had 2 dodgy cans out of 5 !
|
More to the point how's the hand:lol1:;)
|
I'd like to see some pics of the finished paint job, good on you for sorting out your own mess :luxhello:
|
Talking of bonnets, I gently push down on the leading edge of the bonnet's (facelift Classic) 'swage' lines, where they create points of strength/stiffness. So far, no dents (now worryingly runs outside to check.... :D)
|
:lol1: hand is surprisingly fine thanks .
|
Originally Posted by initialD
(Post 10116585)
i get the paint made while i wait at halfords . but if anyone does this always ask them to spray it to see if it works ?? because from my personal experiance 9 out of 10 people that work at halfords are useless !!! and ive had 2 dodgy cans out of 5 !
|
like i said matey , they really are terrible in halfords !
|
Halfrauds is how they are affectionately known.
Last time i went to one which was a couple of weeks ago, i went up to the Parts desk and asked the guy for a Rocker cover Gasket for my one of my Cars and he looked at me Kinda sheepishly and said, "what's a Rocker cover Gasket" |
To be fair, "rocker cover" is technically a term used for old OHV engines, where the cam was inside the block, driven off a gear on the dizzy, which in turn operated, via pushrods, the valve rocker gear in the head.
The modern term, for today's OHC engines (where obviously the cam/s is/are in the heads), is, appropriately, a "cam cover". So, assuming the chap was a typically, low-attention threshold, disinterested 18-25yo, then the term "rocker cover" was probably alien to him. That said, Halfrauds is well gay.... Well, apart from its tools section lol ;) |
Originally Posted by SwissTony
(Post 10116545)
He is just nasty like that maz, as he just likes to see me wince everytime he drops it from about 4 feet !!!
I told him the next time he drops my bonnet I will be drop kicking him :mad::D |
wet sanded and sprayed 7 coats of colour . tomorrow the clear coats allow a week to fully harden and then buff to a finish :D
http://i1091.photobucket.com/albums/...1309794295.jpg http://i1091.photobucket.com/albums/...1309794332.jpg |
Wish I was adept at doing body repairs. :(
*envious* |
well ive been a decorator for nearly 15 years now ! and to be honest its basically the same thing just requires alot more patience . but i have been repairing cars since i started driving and keep improving every time i do it :D
|
It's the 'patience' thing that I don't do. ;)
|
Top work!
|
7 coats of laquer , to be honest i should of done another 5 at least but i run out !:brickwall im hoping i can cut the paint back and it will be fine ?
http://i1091.photobucket.com/albums/...1309879410.jpg http://i1091.photobucket.com/albums/...1309879437.jpg |
All times are GMT +1. The time now is 12:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands