rejioned the fold but !!!!!!!!!!
 

hi all nice to be back.

i haave the my51 bugeye wrx and i have problems with the car already

long story short was told the telephone mask was at fault but i now have a car that will not start.

Q1 does the keypad red light flash when you press it.

Q2 is there anyone who can send me the wireing diagram so i can cut it out if needed.

if i turn the key the dash lights up but not start when i try if i press the alam fob (a subaru one) nothing happens i haave a battery in the key fob and it opens the car doorbut still no start.

any help would be very needed so the wife stops crying ...not joking.

thanks in advance. rikki

what's a telephone mask?

you using an iphone by any chance?

I think he means the Tetra network issues, whereby the cars immobilisers get 'inhibited' by the transmissions of the antennae.

in our car park at the train station (mobile phone mast)

but like said this is not the problem because i am miles away from it now and it still will not work.

do you know if the keypad lights up when pressed?

rikki

sorry and no iphones being used.

rikki

sorry - just wonderted if an iphone autocorrect moment had occured - this is all new to me!

thankfully i have a classic so no such issues... not exactly any help to you though either unfortunatelY!

no worries mark im open to all bits of info so cheers mate for trying

rikki

Sounds like the immobiliser, is it a Sigma alarm by any chance with the keypad?

it is mike and i think the pad has gone but it could be anything.

do you know if the pad light comes on when you press it?

all bats changed and car battery charged.

rikki

Yep the fob should light up when you press it. If you have the code for the keypad you just put that in and it should overide it

Is the engine turning over??

hi ya

no the engine will not turn

thank for that my pad is dead then but could mean the control panel is down i have been told

so have now booked it in to robbertsbidge subaru think i have run out of options really but if you have something else i can try be my guest i open to anything lol

rikki

so going by this my car was registered on the 9/2001 and

All vehicles that passed through the import centre from January 2001 are equipped with the latest receiver boards that are “Tetra Resistant” and so should not experience this problem.

so it cant be that then ?


a few hours on here and i have learnt so much many thanks guys and girls
like i said i think i have run out of options apart from letting subaru take care of it

regards rikki

If you have a few hours to spend this covers most problems with the sigma :thumb:
http://forums.sidc.co.uk/topic/96215...s/page__st__60 When you unlock you car sit in it and try the key if you get nothing press the fob again and see if the red light next to your clock flashes if it does it should be disarmed.

nothing happens when i press anything but

i will add that once the car battery was reconnected by the rac the siren sounds four times then no more.

what i meen by this is once the car had been locked up for a few hours i took a look at it i opened the door and expected the alarm to sound but nothing, i then opened the bonnet and still nothing and until i disconnect the battery and then reconnect the battery the alarm does not work
another thing i found wierd is that if i disconnect the battery the siren stops then reconnect it starts up again(in real time)

tested the car battery and it was at 12.7 volts so in the morning i will try my only hope of not going to subaru

fingers crossed:wall:

atleast the misses has calmed down poor girl:cry:
rikki

if u know the code override for the alarm when you get in the car you put the key in the car without turning it.

Enter the code - you'll get a red flash for each digit you enter. The car will then arm and then you enter the code again and the car will disarm - once done, you can turn the key and it should start :)

Had similar issues and the keypad only gives issues if you turn the key before entering the code.

Failing that - sometimes you may find that you can use the key fob whilst in the car even if it didn't work whilst outside.

If your fob is dud - you can do a search for the Sigma manual on here and then re-pair your fob with the alarm unit.

:)

thanks

hi ya

just to finish this thread i'd like to thank everyone for the help but after trying everything mentioned i have made an appointment at subaru and lets see what it turns out to be .its in on tuesday so i will update this with my findings so the thread is complete for other when searching.
once again cheers guys and girls

3 days just 3 days although better than the mitsi pinni i got , full service and it still blow up with in 80 miles. got to laugh though ay..lol

regards rikki
:)

thanks

got the car back on wed and turns out the contol unit for the sigma had given up so a replacement has now been fitted and all is good .


rikki