fuel pump question
How can you tell the difference between a standard fuel pump and updated one ?
|
Part number stamped on it . may be possible from sound made when ignition is on(little louder)
|
Ok anyone got a part number for standard and a apparently walbro that's fitted to mine ?
|
size also. the std pump is massive in comparison to uprated pumps
here's mine with the uprated one on the right http://www.scoobyireland.com/forum/a...g-dscf0314.jpg |
your cars year and model ?
|
Can you upload the pic on here please, it's a turbo 2000 year 2000 mate
|
|
but part no. for Walbro 255 lph is the GS341
the link above does not work (not sure why) |
Thanks buddy I'll take a look later :)
|
Jcs8 on mine guessing it's a standard one then can't find any part numbers to confirm this if anyone 1 else can grrrrrr pissed off
|
My Classic one says
UNISIA JECS MADE IN JAPAN, and was a fat thing. Other stuff on it are A42-646055 12V 4Z08G. |
Cheers mate mine doesn't say made in japan bit has a whole load of other numbers on it apparently it is uprated but not a walbro , but to me just looks like a standard one ? With a pale brown plastic etheir end
|
My standard one has a black top and metal (grey) underneath.
I fitted a Walbro to mine. Easiest way to compare a Walbro vs standard is the standard is a can of coke, where a Walbro is a can of Red Bull. |
See the one in mine is about the same as a redbull can but Iam sure it isn't uprated as it looks exactly the same as a standard one on eBay hmmmm
|
My genuine Walbro was within 1-2mm the same size as the original. Walbro pump has got the symbol printed on the side. Should be easy to see.
|
2 Attachment(s)
|
Cheers for that mate mine is no where near as big as that although not sure if it is a pump fitted out of a newer model as mine looks exactly same as this http://item.mobileweb.ebay.co.uk/vie...314283&index=0
|
this is mine, side by side.
Fat one = OE skinny 1 = uprated Dynapex http://i5.photobucket.com/albums/y18...1/DSCF0314.jpg |
Originally Posted by BrownPantsRacing
(Post 10053359)
My genuine Walbro was within 1-2mm the same size as the original. Walbro pump has got the symbol printed on the side. Should be easy to see.
Main way to tell the difference is the walbro is a noisey bugger when it primes and the standard is almost silent. |
Yep, know what you mean. Hear it every time I start the car now. Otherwise you just cant tell.
Fish it out the tank and check if it has the Walbro stamp on the side. Only way of being sure! |
All times are GMT +1. The time now is 12:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands