2.1 stroker, which turbo ????
hi guys,
planning on having an engine rebuild soon (going down the 2.1 stroker route) and wondering what turbo you guys are running ?? cheers maz |
I was running an S206 on my old Blobeye with 2.1 from EngineTuner :)
My next build will be running an SC46 hopefully ;) |
How much power you after & are you fussed about spool etc? Many run MD series turbos or even twisted Garret turbos. Then there are other turbos such as SC series etc
|
Depends on if its classic or new age,if have AVCS etc.Personally i have Blouch Dominator 3.0XT-R(SC50).
But i think these turbos will be OK MD321T,SC46.20G is also OK turbo on 2.1 stroker. Jura |
Billet SC46, getting some great results. Think they do a bigger version to depending on end power and engine build strength
|
running a s206 on mine
|
dont be wimps, geta nice 35r on there :D
|
Originally Posted by eggy790
(Post 10023787)
dont be wimps, geta nice 35r on there :D
|
Originally Posted by Aladdin
(Post 10023816)
They dont all live in Bradford with open roads :lol1:
|
Originally Posted by banny sti
(Post 10023818)
I will be testing my 35R in London, greater population of heroes and street racers ;)
|
It is very much based on what you want to use the car for and what spec the 2.1 build is. I am running a TD05 20g although it may be for sale at the rite price as I fancy a billet jobbie
|
how much for our 20g??? Ciaran??
|
Thanks for the input chaps !!! I have a classic rb5 !! Will do some more digging on this !! Will keep an eye on Scooby clinics thread " re - billet turbo,s !! Not sure if they have done 2.1 with a sc 46 !!!!
|
We have done plenty of SC46 equipped 2.1 strokers, with and without AVCS and they are fantastic !
Martyn |
Originally Posted by davefaedeen
(Post 10023928)
how much for our 20g??? Ciaran??
|
Originally Posted by scooby2.5maz
(Post 10023949)
Thanks for the input chaps !!! I have a classic rb5 !! Will do some more digging on this !! Wl keep an eye on Scooby clinics thread " re - billet turbo,s !! Not sure if they have done 2.1 with a sc 46 !!!!
Let alone a 6 speed or ppg? |
Originally Posted by scooby2.5maz
(Post 10023949)
Thanks for the input chaps !!! I have a classic rb5 !! Will do some more digging on this !! Will keep an eye on Scooby clinics thread " re - billet turbo,s !! Not sure if they have done 2.1 with a sc 46 !!!!
Anything over 400bhp and you need an uprated box. Not PPG as it is crap belive me speaking from experience. My current car broke an sti box running 400/400ish |
Originally Posted by stevie1982
(Post 10024085)
Take it you already have the suspension and brakes already done?
Let alone a 6 speed or ppg? hi steve,suspension and brakes already done ta !!
Originally Posted by Ciaran
(Post 10024096)
Valid point SC46 means 460 BHP. I broke the box and various shafts on my car at 330/320.
Anything over 400bhp and you need an uprated box. Not PPG as it is crap belive me speaking from experience. My current car broke an sti box running 400/400ish |
Originally Posted by MartynJ
(Post 10023994)
We have done plenty of SC46 equipped 2.1 strokers, with and without AVCS and they are fantastic !
Martyn ta maz :) |
Yes any power read outs etc
As I'm after a 2.1 I think ?!? But already have sc46 equipped car wanna no what 2.1 will do |
Hello
|
Originally Posted by Ciaran
(Post 10024096)
Anything over 400bhp and you need an uprated box. Not PPG as it is crap belive me speaking from experience.
TX. |
I have but none to hand. To be fair the graphs only tell a very small part of the story, the best bit, the bit you can't see on a graph, is just how nice they are even on a part load.
The best bet is don't ask for graphs, ask current owners of the same combo how they feel about theirs. Or even better, get out in a car fitted with one ! Martyn |
Originally Posted by Terminator X
(Post 10025961)
Twaddle! My ppg is fine at 447/420.
TX. Agree, mine is coping fine also, |
Originally Posted by banny sti
(Post 10023818)
I will be testing my 35R in London, greater population of heroes and street racers ;)
|
Originally Posted by 786omar
(Post 10026110)
Fancy a run ;)
|
Originally Posted by banny sti
(Post 10026117)
Omar you are in neither of them categories, so we can do it on GT5 instead ;)
|
Originally Posted by 786omar
(Post 10026124)
lolll the car will be running soon its with hayward and scott having IC pipes made at the moment :)
|
Originally Posted by DannyBoy007
(Post 10025971)
Agree, mine is coping fine also,
|
Lateral 2.1 with MD321V 503bhp 470lbs/ft on V-power
|
All times are GMT +1. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands