![]() |
fitting a coolant sensor
hi what do i have to remove to fit the above to a 94 wrx , the car has a front mount ,
i did a search and the only pic i found show it with the intake manifold removed. any help would be grateful cheers j |
It's on the rear of the coolant crossover pipe, which itself is located at the top-rear of the block. There are two sensors next to each other: large one is the ECU's CTS (small one is dash's temp gauge sender).
|
Originally Posted by jaywrxsti
(Post 9971101)
hi what do i have to remove to fit the above to a 94 wrx , the car has a front mount ,
i did a search and the only pic i found show it with the intake manifold removed. any help would be grateful cheers j Are you wanting to fit a new coolant sensor? If so, which one, the gauge, or the ecu? Are you fitting a DIFFERENT sender where the gauge one is? |
Originally Posted by alcazar
(Post 9971216)
Can you be a bit more precise as to what you are trying to do?
Are you wanting to fit a new coolant sensor? If so, which one, the gauge, or the ecu? Are you fitting a DIFFERENT sender where the gauge one is? |
Ah.........then follow instructions above: there are two, the one YOU want has three wires, not two.
|
All times are GMT +1. The time now is 06:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands