|
Anyone into or know anything about technical drawing (for kids)
My son, (11 Y/O) has expressed a keen interest in technical drawing recently, as he is thinking about his GCSE soon, he was asking me what would be the best option to study for in this field with maybe a view to architecture.
I have said that Maths, science would be the obvious choices, but these are compulsory anyway but what others would give him the required knowledge or skills to carry forward with the drawing/designing side. I wasn't sure about art as all we did during art was make silly shapes out of clay and generally not much else. Also can anyone recommend any entry level equipment that might be good for him to learn with? I have seen some cheapish drawing boards on EBAY for around £30 or so. And basically any other advice I can pass on to him. Many thanks. :) |
the way things are going, IT or computing would be a good one to add as well (if there is one of those) most drawings are computer driven now. If he likes doing it could get him a drawing package on the computer and let him have a play :)
|
Have a look at google sketchup, its free to use and download and is pretty good for any basic drawing requirements I have. I doubt it would be recognised by any of the exam boards but might give him enough insight into that sort of programme to be able to progress from in due course.
|
Originally Posted by fitzscoob
(Post 9936194)
Have a look at google sketchup, its free to use and download and is pretty good for any basic drawing requirements I have. I doubt it would be recognised by any of the exam boards but might give him enough insight into that sort of programme to be able to progress from in due course.
Is it all computer based now, or do you learn both methods- paper + computer? |
personaly i'd move towards computers, 99% of drawings are doen that way now, even sketch's
|
Good quality squares, 60/30 & 45 degree, a decent pair of compasses, and propelling pencils with assorted refills are all I've ever used, although as Tidgy says it's almost all computer driven these days.
In terms of software, I would have a look to see if Autodesk do any personal/home use packages. |
If he wants to become an Architect, then he needs to be learning to draw on computer.
You can get a basic AutoCad LT for a few hundred quid. He should be looking to go to college at 16, and do a BTEC in Building studies. Followed by a HND in Building studies at University or directly onto a Designated Architecture course at Uni. It takes a while though. Prepare him for studying at Uni till he's 24/25. My mate did this (at Newcastle University) and has done very well for himself. Within 12months of starting, he was running his own team, and now is an Associate with several design projects running beneath him. Also tell him that the hours are long..............very long. Expect to start work at 7am and finish after 7pm. No overtime. You can start at 9 and finish at 5pm if you want. But you'll always be at the bottom of the ladder. My mate is just about to start building his own house (designed by himself) and has talked about getting a Gallardo to sit inside the Garage. |
Originally Posted by stilover
(Post 9936220)
My mate did this (at Newcastle University) and has done very well for himself. Within 12months of starting, he was running his own team, and now is an Associate with several design projects running beneath him.
he's done very well for himself indeed :thumb: that sort of thing is far from the norm |
Originally Posted by stilover
(Post 9936220)
You can get a basic AutoCad LT for a few hundred quid.
|
Originally Posted by Tidgy
(Post 9936256)
autocad is the way to go, but prob a bit too advanced at 11
|
Originally Posted by Tidgy
(Post 9936251)
he's done very well for himself indeed :thumb: that sort of thing is far from the norm
|
Originally Posted by stilover
(Post 9936267)
Not really, I'd have thought. Basic skills are picked up quite easily. Always best to learn on the systems that any future job would be using.
at 11? i agree its def the package to aim for but at 11, just playing around with something is fine. but considering the cost of autocad i dont think it is justified. |
Originally Posted by stilover
(Post 9936220)
If he wants to become an Architect, then he needs to be learning to draw on computer.
You can get a basic AutoCad LT for a few hundred quid. He should be looking to go to college at 16, and do a BTEC in Building studies. Followed by a HND in Building studies at University or directly onto a Designated Architecture course at Uni. It takes a while though. Prepare him for studying at Uni till he's 24/25. My mate did this (at Newcastle University) and has done very well for himself. Within 12months of starting, he was running his own team, and now is an Associate with several design projects running beneath him. Also tell him that the hours are long..............very long. Expect to start work at 7am and finish after 7pm. No overtime. You can start at 9 and finish at 5pm if you want. But you'll always be at the bottom of the ladder. My mate is just about to start building his own house (designed by himself) and has talked about getting a Gallardo to sit inside the Garage. Thanks for the info, I have explained to him that he will be studying until he is in his mid 20's and he is fine with that, well he will be until he discovers how nice boobs and beer are.:D Saying that though he is very much into his school work for a lad of his age, and is doing work that is one and sometimes two years ahead of his year. |
Also look at solidworks, I think student editions are around £79.
http://www.ntcadcam.co.uk/solidworks-education.html |
Originally Posted by Tidgy
(Post 9936283)
at 11? i agree its def the package to aim for but at 11, just playing around with something is fine. but considering the cost of autocad i dont think it is justified.
|
| All times are GMT +1. The time now is 11:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands