Hawkeye STI dials into Bugeye STI (deif style)
 

Bought a set of these today for my Bugeye
http://i4.photobucket.com/albums/y10...8/IMG_0249.jpg

How do i get them to fit into my STI?

Is it just a straight swap?

Thanks in advance

no it is not. first of all the two small plugs from your loom wont fit the sockets ont he instrument cluster, however you can make it fit by filing the teeth on your green plugs. when you manage to fit it. you will notice that the number 15 fuse in the fusebox under the steering wheel, blow, once you turn the ignition on. this fuse operates the air con etc. you will have to cut the yellow and green cable (no 29) on the main (big) green plug.it is the third wire from the end on the top row. by cutting this cable you will not upset the performance of anything in the car. it is totally safe to do.just make sure you isolate the cut wire properly. and then it is ready. enjoy
matt

Where did you source them from mate?

Thanks mate

Yea i notice the left loom does not plug straight in

Any idea why there is a buzzer sounding lol i read this happens just need to figure out how to stop it :-0

I have had no fuses blow or anything pal

The reason you have a buzzing noise is because the old guages required a power source for illumination, whereas the new ones are lit from the main circuit inside the unit.



You need to cut wire C9 to stop the buzzing.



Make sure you cut the wire quite far up so that you can reconnect it easily should you ever want to put your old guages back in as with this wire not conected you will have no light to the old guages.



I did mine last week, great improvement for me.

ALL sorted

Had to snip one cable to get the buzzer off. Job done

Thanks mate - I eventually found the cable through trial and error lol I LOVE THEM

Check them out
https://www.scoobynet.com/805211-my-...rodrive-5.html

Look good mate.

To get the rear diff temp light off you need to ground cable B4.

On your model of car the ABS light plug is reversed so the ABS light somes on and goes off when you have a problem with the ABS.