hella horns issue on a bugeye
1 Attachment(s)
how the hella do you fit the horns behind the grill as there is a power steering pipe in the way on the drivers side
its a prodrive grill Attachment 66892 you can just see the pipe on the drivers side , not enough room to fit it in front of the pipe |
anyone ?
|
remove the p,s cooler pipe and away you go.:thumb:
|
is it not needed then ?
or do you have to relocate it ? thanks |
i have taken it off my present car and took it off my last one too.
|
There is a picture of them on this bug ( its not a prodrive though )
https://www.scoobynet.com/projects-4...ild-again.html |
1 Attachment(s)
|
I slotted it in the PS cooler:thumb:
http://img.photobucket.com/albums/v5...6/DSC01523.jpg http://img.photobucket.com/albums/v5...6/DSC01529.jpg |
Originally Posted by bigarf
(Post 9775423)
i have taken it off my present car and took it off my last one too.
|
Originally Posted by NEILB1
(Post 9775570)
wondering why you did that :confused:
|
1 Attachment(s)
I just bent the bracket it sits in a little bit and you can push it a bit further back towards the radiator. You can then fit it behind the grille. On the red one above it looks like he's cut the bracket off completely as it would normally be attached to the centre bit. That's fine too as it's quite secure without it anyway.
You can't slot it in the PS cooler with the standard grille, there isn't enough room. Like this - Attachment 66894 |
All times are GMT +1. The time now is 01:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands