FOR SALE... LOTS OF CLASSIC OEM + AFTERMARKET PARTS!!!
 

As title, quite a fair bit to list.

So just ask for anything... anything you can think that you need/would like! I might just have it! ;)

If I have it or not I'll reply to your enquiries and we'll go from there.

But please just enquire on here in the first instance (no PMs/emails).

I DO have a set of 4-pots! They need repainting (if it bothers you that is), but were working beautifully (so DON'T need overhauling with new seals and/or pistons). :)

Also have a set of used PF 97 pads to fit the calipers, that have way over half the meat left on the pads - only had them in for about 2-3 months or so (and never really drove the car hard at the time).

Also have a set of OEM spec Blue-print 294mm front discs to fit the 4-pots.

Don't have the clear indicator Classic lights, but do have an excellent set of the amber ones (as well as OEM amber phase-1 indicators + amber side repeaters).

exhaust manifold ?

Yes!

It's been mildly ported by a previous owner too! It's an early OEM 3-piece one with lambda boss on driver's section.

I also have a mildly ported 40mm dia. slip-jointed uppipe - perfect size for quickly spooling up most <400bhp turbos... ;)

Would prefer collection... But you're in Wales! :( Could you collect?

£180 the lot, collected? If necessary I could send...

hi, any uprated rear anti roll bars idealy 24mm.
thanks kev.....

I have Whiteline 22mm front and rear ones........ But they're going on my car! lol

Sorry mate. :(


I have some std MY93-96 WRX ones though...

oil catch can.....

No, sorry. (Ironically I had a catchcan/full breathers-to-sump fitted at API the other day!)

I do have the Forge MY93-96 all-alloy header tank though (with 1.3bar cap).....

turbo back system to fit a my96?

Yes! I have a really good condition full true 3" turbo-back Jasma system.

It comprises a sportscat d/p, resonated centre and a big back box with a Jap-style round 4.5" shallow slash-cut tailpipe. It only looks a few hundred miles old. The d/p has been heatwrapped over its top third i.e the important bit after the turbo. The system is very quiet though.

Or if you want a bit more noise, I have a 2.5" straight through centre and a Prodrive backbox with a round 3.5" rolled-in tail. The back box's mating flange is a bit knackered tbh, so would need to get it angle-grinded off and a new one welded on (inexpensive and a piece of pee for a exhaust place to sort). Cobra can do it... or at least supply a flange.


I also have an OEM catted d/p from a MY93 lol

Strange request, but worth a try...

STI door mirrors? and/or some alloys? For 96 import.

No door mirrors I'm afraid.

Only have the early MY93 WRX 15" 5-spoke gunmetal centre/silver rim ones with budget mix 'n' match 195/60 R15 tyres...

darn it, thanks anyway!

how much for the header tank mate?

De cat downpipe to fit a 97 sti import if so how much??
Cheers

Only have a Jasma sportscat (marginally more restrictive than a full decat). It has been heatwrapped (see above)...

Brand new on eBay, cheapest they're £145!:-

Impreza MY93-96 Forge alloy header tank

Have it for less than half price (inc. cap) - £70?

thermostate and top rad hose for a 93 wrx?

Hi there, I'm looking for:
Air resonator box
MAP
PES
Three ports boost control solenoid and hoses

All for a 96 wrx wagon :wonder:

* I do have an OEM working stat somewhere - may take some digging to find it, though. :(

It was tested it was still working on removal and opened fully in boiling water... :)


* Both OEM rad hoses were sold ages ago. :(

k, well, if you did it out, let me know how much you want for it and how u want paying. cheers.

I only have a M99 2-port BCS assembly/lots of vac piping.

I only have the MY99 air filter box, air feedpipes and the panel filter.

TBH mate, brand new, they're only £15 from ICP:-

http://www.importcarparts.co.uk/parts_info.asp?id=994&cat=0⊂=0&sec=0&var=0&dc=&gen =&searchKey=thermostat


To make it worth my while I'd prob want a tenner for mine anyway - so prob best off with getting a new one ???...

Would you have a TD05H turbo by any chance, thanks.

No, but got a 44k miles VF28. It's front entry, but if you have a MY93-96, it's only a silicone hose, ally joiner and a couple of jubilees needed to mate up with your intake system.

But you WOULD require a remap though. Nice responsive turbo (a shade more responsive than a 16g) good for about 320bhp (would need the 440cc inj. and a later TMIC as well though)...

...I also have the MY99 440s and the MY99 TMIC/DV.

Ok cheers for reply, will see if i can find a td05 first as need one for a friend which i have to fit on sat, thanks again.

Yeah no worries. :thumb:

Just thought I'd mention it, just in case it would have been an option......... ;)