Custom made Subaru specific catch cans (Group buy no.4)
After the success of three group buys I have had requests to do another.
See thread no.1 https://www.scoobynet.com/group-buys...atch-cans.html And thread covering GB 2 and 3 - https://www.scoobynet.com/group-buys...-cans-2-a.html I originally had one made previously for my race car as the general market forgets about us Subaru boys needing 3 inlets rather than just 1 or 2. I am sure you have seen the RCM ones at £175+ ! It's certainly not cheap to get one made to the standard I wanted, however I was chatting with my supplier and he said he would be more than happy to do a batch at reduced costs if I would handle everything. So spec is a 1 litre can with three 10mm inlets and one 25mm outlet. And a drain plug, there is then the option of a -10 AN fitting to return to sump if required. We all know what the benefits are I am sure by getting rid of engine vapour, reducing crankcase pressure and by removing that vapour your not reducing the octane value of your fuel. Heres a few pics of the one I have now unfitted. http://i2.photobucket.com/albums/y21/clive1973/Can1.jpg http://i2.photobucket.com/albums/y21/clive1973/Can2.jpg http://i2.photobucket.com/albums/y21/clive1973/Can3.jpg Here's a pic of my other one I fitted on the passenger side suspension turret where it fits very neatly :) http://i2.photobucket.com/albums/y21.../Catchcan4.jpg Here's the fitting guide - http://i2.photobucket.com/albums/y21/clive1973/Can6.jpg Pipes on cam cover breathers - http://i2.photobucket.com/albums/y21/clive1973/Can5.jpg http://i2.photobucket.com/albums/y21...973/Can3-1.jpg Main engine breather here, you will see 2 pipes. Really you want to block off one and then run a pipe from here to the can http://i2.photobucket.com/albums/y21/clive1973/Can4.jpg Three pipes in to the can http://i2.photobucket.com/albums/y21...973/Can2-1.jpg Then breather pipe from top of the can http://i2.photobucket.com/albums/y21...973/Can1-1.jpg Costs if there is demand for 10 minimum £70 Can only £80 Can with -10 AN Drain £10 extra to include pipework Get your names down with what you want :) |
im interested in this, just not sure which one i need for my bugeye.. i'll find out and let you know..
but 1) eggy790 |
Good piece of kit this, using them on the new race car :)
|
Thanks Andy, latest versions are even nicer than my pics with a brushed finish
|
what are they like inside? empty or do they have baffle type plates in?
|
Empty mate
|
http://i56.tinypic.com/n6z29c.jpg
Pic here of them being installed on Andy Forrests new race car. Hope you don't mind me stealing pic Andy |
Mine with 2 outlets has never worked properly and I missed the last groupbuy...
Can put me down for one with pipework. |
Oops...double post.
|
The brushed looked really good, a Very good buy.
Will tell some of my mates Clive as they asked for catch can. Jan |
Can you put me down for one with pipework as well please. How will you contact me when its ready?
|
eggy790
Rooferman (with pipes) carpboy (with pipes) Really need 10 to make this work chaps. Once we have that I will PM you all for monies/addresses etc. Clive |
Originally Posted by Mad Hammer
(Post 9703276)
eggy790 (basic no drain or pipes)
Rooferman (with pipes) carpboy (with pipes) Really need 10 to make this work chaps. Once we have that I will PM you all for monies/addresses etc. Clive just updated mine on there mate :D ive got pipes |
1. egg 790
2. Epidermal(with pipes) 3. Carpboy (with pipes) 4. B16msu265 (with pipes) Thats better |
Predictive text mistake I hope !
|
[QUOTE=b16msu265;9705174]1. egg 790
2. Rooferman (with pipes) 3. Carpboy (with pipes) 4. B16msu265 (with pipes) Thats better
Originally Posted by rooferman
(Post 9705236)
Predictive text mistake I hope !
|
Anybody got a photo of one fitted to a blobeye? How easy was it to fit?
Thanks :thumb: |
Originally Posted by spikester
(Post 9706521)
Anybody got a photo of one fitted to a blobeye? How easy was it to fit?
Thanks :thumb: Iv removed my top mount and have more space to play with now. |
bump....
|
Bump
|
1. egg 790
2. Epidermal(with pipes) 3. Carpboy (with pipes) 4. B16msu265 (with pipes) 5. Scooby Arthur (as long as it is not until the new year) |
Free bump for a quality bit of kit. I have the first edition on my car and got a mate the brushed version both top quality. There was an offering on here of a copy at £25, after seeing the cheaper version for myself recently its clear to see why the were £25. Difference was night and day.
Will post a pic later of one fitted to a newage. |
Originally Posted by 71/200
(Post 9721190)
Free bump for a quality bit of kit. I have the first edition on my car and got a mate the brushed version both top quality. There was an offering on here of a copy at £25, after seeing the cheaper version for myself recently its clear to see why the were £25. Difference was night and day.
Will post a pic later of one fitted to a newage. |
just a side question.. how often wil they need emptying?
|
Bump
1. egg 790 2. Roofermanl(with pipes) 3. Carpboy (with pipes) 4. B16msu265 (with pipes) 5. Scooby Arthur (as long as it is not until the new year) |
Originally Posted by eggy790
(Post 9722005)
just a side question.. how often wil they need emptying?
Clive |
okay cool, mine will be more like your second car lol, is their any indication of when its full or do you just keep checking it now and again?
p.s. i will be in touch this friday to arrange payment for the gt spec headers :D |
Originally Posted by eggy790
(Post 9727641)
okay cool, mine will be more like your second car lol, is their any indication of when its full or do you just keep checking it now and again?
p.s. i will be in touch this friday to arrange payment for the gt spec headers :D Headers will be off and packed this weekend chap. |
no worries mate, i will sort you the money out friday night :)
free bump. |
come on peeps good bit of kit put your names down
bump |
All times are GMT +1. The time now is 01:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands