Billet timing belt guide ej20/2j25
 

Hi,

Thinking about running a batch of these off guys, like the cosworth ones here..
http://cgi.ebay.co.uk/Cosworth-Cam-T...item483ba5d790

quote
"The original sheet metal timing belt guide can flex from belt deflection when subjected to extreme
rpms causing the timing belt to skip one or more teeth on the crankshaft sprocket. The Cosworth Billet Timing Belt Guide was developed to control this problem and is machined from solid aluminum ."


Will be our hard anodized finish with our logo.



Need a run off at least 10 guys to make this worth while:
Retail will be £39.99+delivery

First offer price £25+£3 post


Let me know who is interested :thumb:

sounds good, will be up for this :)

Ooooh yes please!

You know me Chris, I'll have one too. :)

oh go on then you've twisted my arm:lol1:

Yeah, think i'll have one, a birthday present for myself...:D

Is this something you can easily fit yourself? If so, yeah I'd think about it ;)

Yep - count me in.

I'll start a list then...................

1 - Wongy
2 - rookymatt
3 - Cannon Fodder
4 - Prodriverules
5 - Bigbob3000
6 - Bugeye scoob?
7 - WUZ

1 - Wongy
2 - rookymatt
3 - Cannon Fodder
4 - Prodriverules
5 - Bigbob3000
6 - Bugeye scoob?
7 - WUZ
8 - Banny

1 - Wongy
2 - rookymatt
3 - Cannon Fodder
4 - Prodriverules
5 - Bigbob3000
6 - Bugeye scoob?
7 - WUZ
8 - Banny
9 - Timmyajmy93wrx

1 - Wongy
2 - rookymatt
3 - Cannon Fodder
4 - Prodriverules
5 - Bigbob3000
6 - Bugeye scoob?
7 - WUZ
8 - Banny
9 - Timmyajmy93wrx
10 - Scooby-S
__________________

chuck me in there to chris

Will do Si :thumb:

Hope all is well


1 - Wongy
2 - rookymatt
3 - Cannon Fodder
4 - Prodriverules
5 - Bigbob3000
6 - Bugeye scoob?
7 - WUZ
8 - Banny
9 - Timmyajmy93wrx
10 - Scooby-S
11.sihorton

one thing to remember is that if you have a kevler belt fitted like i do on mine is that my cosworth one needed the holes opening out slightley due to the belt being thicker,might be worth looking into this CDF,

Cheers :thumb: , how much did you open them up by?

can't remember now as it was some time ago,do remember thinking at the time that it was a fair bit mind,belive simon,jolly green monster had to do the same on his project build as he told me he had done the same on his

will look into it , cheers

also worth telling anyone that buys one that some early wrx's didnt have the mounting holes in the oil pump for them to bolt onto.

I have a cosworth belt. Hope this is still ok to fit as i do like shiney bits that actually serve a purpose. :(

any ideas which? i have a 1996 version 2- anyone know if it will fit mine!?

Had a similar issue, I bought the cosworth one and it wouldnt fit with my belt. I wasnt prepared to open the holes up incase the bolts slackened enough to allow the guide to move and come into contact with the belt. It has to run close to the belt obviously but the room for error here is very small.

May be interested if you can work around the fitting issues as seen on the cosworth item with the kevlar belts. I have a Cosworth one here but sounds like it wont fit with my PE kevlar belt. :(

I will also have one if the issue with the kevlar belts can be addressed.

Wuz also runs a kevlar belt so would imagine he is in the same boat!

Ah! but I have a plan.

Russell

it will be guys, no problem now that I know :thumb:

Does anyone have any photos of these once they are installed?

count me in too

please add your names if you want one :thumb:

1 - Wongy
2 - rookymatt
3 - Cannon Fodder
4 - Prodriverules
5 - Bigbob3000
6 - Bugeye scoob?
7 - WUZ
8 - Banny
9 - Timmyajmy93wrx
10 - Scooby-S
11.sihorton
12.pete96wrx