Oil cooler advice
 

Hi, recently bought my self an oil cooler from a Snet member, and am looking at fitting it in the near future. I have a few questions regarding the fitting etc.

1. If i spray the cooler black how badly will it affect the performance of it?
2. Do i go for a thermostatic sandwich plate or not?
3. How do i work out how much extra oil to add on a service?

Thanks
Mike:thumb:

1. It will slightly affect it, but if you'd really notice the difference, not sure? Quite a few people spray their intercoolers to no ill effect.

2. Yeah, you want a thermostat on it

3. Easiest way would be to fill the pipes and cooler up with oil, then measure what you've poured in.

Thanks for the reply, would an ordinary vht paint be needed?

Mike, one question before you go further: What average and peak oil temperatures are you seeing at the moment, and what is the state of tune/modification of your engine at the moment?

Will be c.340bhp/FMIC/Simtek/Injectors to suit/AFP5-16Hybrid etc... :)

Cooler is foresight for trackday oil temps, road use is meh !:thumb:

It's a nice little OEM Spec C unit, will fit tidy behind a classic grille and will be all the better for a spritz of VHT.:thumb:

:thumb: