ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   3/4 door classic Cage fitting (https://www.scoobynet.com/interior-15/850849-3-4-door-classic-cage-fitting.html)

phil84 13 September 2010 12:25 AM

3/4 door classic Cage fitting
 
Is there any differences between a cage for a 3 door and a 4 door saloon.

Help please:wonder::confused:

I've seen 1 that was in a 3 door but am not sure on the fitment for a 4 door.

The general shape will obviously fit but its the part that comes between the doors I am concerned about.

Some pics would be helpful if possible.

Thanks Phil.

dazdavies 13 September 2010 08:16 AM

Cage will fit both. However on a four door the main hoop has to go in through the back doors when trying to get in into the car.

phil84 13 September 2010 05:34 PM

cheers daz :thumb:

fmp 14 September 2010 08:31 PM

are the doors/B pillars in the same place on a 2 and 4 door car?

If in different places, then the position of the main hoop would be different.

I have no idea about classics, so forgive my ignorance with the first question!

Dutch Scooby lover 22 October 2010 06:37 PM

The front doors on a 2 door are longer.
However, as my 4 door cage for example has its hoop about 8cm behind the B-pillar it would probably work out on a 2 door car, as the door of a 2 door is about 10cm longer I
reckon.

Side view of my car/cage.
http://i159.photobucket.com/albums/t...b/IMG_0042.jpg

Fat Boy 28 October 2010 03:33 PM

2 door cage to a 4 door is not an issue AFAIK, but if you're fitting a 4 door cage to a TWO door ( ;) ) then be aware that you need captive nuts as you can't open the back doors to get to the back of some bits.


All times are GMT +1. The time now is 01:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands