ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   what power from v5 sti (https://www.scoobynet.com/general-technical-10/837883-what-power-from-v5-sti.html)

BlackV3STI 17 June 2010 01:14 PM

what power from v5 sti
 
Hi all

What power in terms of BHP and Torque should i be getting around about from a v5 sti witha vf28 Hybrid FMIC and K&n Kit and a full decat exhaust coupled with a simtek ecu , as that is what i have and even though it feel rapid , it doesnt feel scary which is what i wanted!

Also it runns at 1.5 Bar , is that around about right?

rickya 17 June 2010 01:47 PM

Approx 320bhp with similar ft/lbs torque, turbo will be limiting factor & then injectors.
Safe boost IMO on a 12 year old VF28 would be around around 1.4 bar

Fitting a Vf34/5 & a 3 port boost solenoid & remap, may get you to around 360bhp.

BlackV3STI 17 June 2010 03:42 PM

360 BHP Mhhh sounds nice

how much would i be looking at in terms of money for a Vf34/5 (there not twin scroll are they) and a 3port boost solenoid .

My engine has only covered 42 K miles and that is guaranteed totally , would i be pushing the turbo if i started putting more pressure through it as i have been told they are very fragile to start off with

Also i have a slight fluctuation in boost from 1.4 to 1.5 Bar which does seem abit odd but it runs perfect


at 360 BHP would that mean a new gearbox?

sparkytrix 17 June 2010 10:32 PM

just to compare..I have almost identical mods to you, although standard top mount...

mine is running 305bhp @ 1.4 bar

It seems the standard gearboxes dont like beyond 330bhp...all depends on how you drive of course :thumb:

Playsatan 17 June 2010 11:40 PM

I had my version 5 dyno'd with the only mods being a decat,fpr and walbro fuel pump and it made 320 bhp.

The gearbox was fine past 420 btw.

TonyBurns 18 June 2010 07:26 AM

If you want to keep the car in one piece then dont go above 350bhp, thats the safety limit on the engine for reliability, and even then its pushing it, your better off with a nice 330bhp/320lbs of torque, that will make for a quick road car, wanting more power will cost you maga ££

Tony:)

chris cairns 18 June 2010 08:00 AM


Originally Posted by BlackV3STI (Post 9452165)
Hi all

What power in terms of BHP and Torque should i be getting around about from a v5 sti witha vf28 Hybrid FMIC and K&n Kit and a full decat exhaust coupled with a simtek ecu , as that is what i have and even though it feel rapid , it doesnt feel scary which is what i wanted!

Also it runns at 1.5 Bar , is that around about right?


i have the same car with 3" exhaust, fuel pump, headers, remap=333/310

it didnt last long before the engine let go and now im in the process of running in the rebuilt forged engine

BlackV3STI 18 June 2010 02:25 PM

why would the engine let go at 330 BHP

I thought the EJ207 STI engine had good strong internals

i would be led to believe that i am running between 320 and 330 as my mates sti never stands a chance against me at all!

my engine feels really strong and doesnt have any issues at all!

am i bein optimistic then?


All times are GMT +1. The time now is 04:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands