ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Brakes locked on ???? (https://www.scoobynet.com/general-technical-10/837660-brakes-locked-on.html)

-Clarkey 15 June 2010 09:57 PM

Brakes locked on ????
 
Hi,
I have a subaru classic 1996 wrx and the brakes are locked on, thought it was just one seised caliper but jacked it up and all the wheels are tight. When you take handbrake off car doesnt move so taken that out of equation, any ideas?

Yesterday you could feel the brakes coming on a little bit now and again when driving but now is totally stuck on drive.

r1c 16 June 2010 12:15 AM

Get it recovered to a decent garage mate, it's impossible to diagnose over the internet

-Clarkey 16 June 2010 09:23 AM

Just had a look at it this morning and the brakes arnt locked on anymore, not gonna risk driving it and getting stuck somewhere

alcazar 16 June 2010 10:31 AM

Brake master cylinder problem?

Turbotits 16 June 2010 08:16 PM

you wont turn the wheels easily with just one wheel jacked up as your winding the diffs and gearbox up> unlike a conventional 2wd where wheels can be spun easily one at a time this doesnt work with the 4wd system on a subaru. Why do you think your brakes are looked on? what are the symtoms??

tathan 16 June 2010 08:25 PM

edit: ignore, I'm being retarded.

-Clarkey 22 June 2010 11:01 PM


Originally Posted by Turbotits (Post 9451175)
you wont turn the wheels easily with just one wheel jacked up as your winding the diffs and gearbox up> unlike a conventional 2wd where wheels can be spun easily one at a time this doesnt work with the 4wd system on a subaru. Why do you think your brakes are looked on? what are the symtoms??

Rebuilt the front brakes to see if they had sezied but the brakes still locked on, after pushing the brake pedal the pressure stays in the brakes as when you crack the bleed nipple brake fuild sprays out, so has to do with the master cylinder?

-Clarkey 03 July 2010 07:06 PM

Run out of ideas now , ive changed master cylinder and servo bled the system through and it still wont move. Ive taken the pin out the brake cable to see if it needed ajustment but is fine so thinking handbrake now maybe?

dunx 03 July 2010 10:28 PM

Does it have ABS ?

Or are you confusing a failed centre diff with a braking problem ?

dunx


All times are GMT +1. The time now is 02:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands