help with 98 classic
 

could anyone post up a diagram, or at least tell me what pipes go were on the boost pipes(3 port) and the rest of the pipes, as mine are mixed up ...thanks

A 98 has a 2 port as OEM, doesn't it? Would appear that a 3-port has been put on as an upgrade?

Anyway:-

3-port connections:
http://i17.photobucket.com/albums/b6...h/DSC00146.jpg

2-port:
http://www.wallpaperinstaller.com/scooby/cobb1.jpg

If I'm right about the 98 having a 2-port as std, then you need to be sure that the 3-port replacement is hooked up properly. So see here:-

https://www.scoobynet.com/general-te...-solenoid.html <<< Check out JGM's correct info in that thread.


IMPORTANT: And if your car has been changed from a 2-port to a 3-port, then a remap is required too!

thanks mate, not sure how , but the side exit one is connected to the FPR. this is a car i bought to rebuild ,its going but not on the road yet. thanks:thumb:

:eek:

;)