ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   Number Plates (https://www.scoobynet.com/scoobynet-general-1/8320-number-plates.html)

Iain P 17 December 2000 12:15 AM

I recently bought all the gear to make my own plates (I needed a few myself so thought what the hell) and had to buy a minimum amount of bits. If anyone would like a standard replacement plate, a special track plate, a plate with adjusted spacing, a sign for your bedroom (!) or whatever then please e-mail me direct. Cheap but high quality. Apparently next year the laws change to a new format and if your existing plate needs replacing then you will only be able to buy the new format from an licensed retailer. So if I can help.........

Chizz 17 December 2000 07:04 PM

just what i need im after a special plate for my import you see the nice guys at Halfords only sell big square plates i need them smaller i will get back to you with sizes etc after Xmas Nice job

RichB 18 December 2000 09:55 AM

Good Timing Iain, I'm just about to get some spare plates for that very reason, dont like the new font...

Anyone interested in the new regulations, have a look

Iain P 18 December 2000 06:02 PM

standard plate is £6.50 ea and with a border is £7,50 ea. I'll let you know about postage but I guess around £1-2. Halfords charge £10 with the border so should still be a few quid cheaper even with postage and I will sort out any spacing you like (not for road use, of course!)

Andy Tang 18 December 2000 06:08 PM

I have a number plate with 5 characters. Is it possible to have the first character the legal spacing from the left side, legally space the other characters, leave the legal end space, then cut off the rest of the unused plate?

So legal spaces, legal letters, just a dodgy sized plate! http://bbs.scoobynet.co.uk/wink.gif

Cheers
Andy

Iain P 18 December 2000 06:21 PM

Should be simple enough to cut one end off the perspex before the numbers and backing are bonded on - the backing is trimmed last anyway. Don't think it's illegal to have a shorter plate as long as the spacing and font are OK.

RichB 19 December 2000 10:28 AM

I presume you can offer these plates using any of the currently legal 4 fonts and some of the more popular illegal ones can you?

I am specifically interested in the legal high line font.

Iain P 19 December 2000 01:24 PM

Only the legal fonts and hopefully the 2.5" format as well. I have only really stocked up on standard bits but have had lots of enquiries for something different so I'll get different fonts and sizes as well........

Iain P 21 December 2000 07:17 PM

Reminder...........anyone due a response will get it directly, soon.

Iain P 26 December 2000 10:25 PM

Martin, please e-mail me your address again, I accidentally deleted your note (and e-mail). If I can send it tomorrow a.m. you should get your track plates for Donno!
Cheers

Iain P 27 December 2000 08:54 AM

If you want the width cut down that is no problem. If you have 5/6 characters or less then the plate can be cut down quite a bite and still be legal. Don't forget about the new laws in the new year - extremely heavy fines for illegal plates. If you want any, e-mail me direct.
Cheers

Maxy_UK 27 December 2000 12:30 PM

Hi Iain, i would be interested in a smaller front number plate. Are you able to do these yet?

If yes what do i do, send u an email?

Maxy_UK 27 December 2000 12:52 PM

Here is a piccie of the kind of number plate i would like.

http://www.mudd90.freeserve.co.uk/Mu...nt_view4-1.jpg

This car belongs to muddy i found it on the members gallery....hope you dont mind me using this muddy http://bbs.scoobynet.co.uk/smile.gif

Iain P 02 January 2001 10:24 AM

Can also make 'sticker' plates now to fit on bonnet, bumper, etc. E-mail me if interested.
Iain

Andy Tang 05 January 2001 05:52 PM

Just thought I'd give some feedback.

I'm dead chuff'd with my new number plates. The smaller front one looks great! http://bbs.scoobynet.co.uk/biggrin.gif

The quality was better than the one I took off!

Cheers Iain

Iain P 05 January 2001 06:19 PM

Cheers Andy.........lets have a picky then! You've got a good private plate there!

Andy Tang 05 January 2001 08:45 PM

I would have posted a piccie, but the obvious paranoia takes over, and concerned about publishing the plate!!! http://bbs.scoobynet.co.uk/frown.gif

Yes it is a cool plate!!! http://bbs.scoobynet.co.uk/biggrin.gif

Anyone popping down to the Fleet meet can have a closer look!!

Clarey 05 January 2001 09:06 PM

I would also like to say i was very impressed with my new plates from Iain. Not only did they arrive quickly, but were exactly what i asked for http://bbs.scoobynet.co.uk/smile.gif

Thanks again Iain,
Phil.

Triggaaar 05 January 2001 10:39 PM

Iain,
I'm after a new front number plate. I've had a look on the DVLA website which explains the new font and sizing, but it doesn't say anything about sticker number plates.

If you fit a correctly sized sticker number plate on your bumper, it is not exactly readable, but is it illegal, and if so, on what basis (I assume there needs to be a clearly defined rule, not just 'it's difficult to read').

And are sticker number plates legal if placed at the bottom of the bonnet? - I ask as they will appear smaller from the front than a standard plate, because they are at an angle.

Thanks

Iain P 05 January 2001 11:03 PM

Thanks for the coments guys. I really started doing my own because it's difficult to get cutdown plates, something slightly different or decent quality. Cheers.
I think the law is that you must be able to clearly read the plate at a 5 deg angle from the horizontal plane. I have seen many cars (even new Jag XK8's) with sticker plates on the bonnet. On the scoob, they are clearly visible here. I think mounting them to the bumper might be 'dodgey' - even so, if you do get stopped you can relocate it to the bonnet!

Iain P 13 January 2001 06:37 PM

I can now do a few more plate options (plate sizes, text, mounting holes, etc....) so if you are interested I can e-mail you an order form / price list.
Cheers for now

Maxy_UK 13 January 2001 07:09 PM

Hey Iain

could you email me one of your order forms

Maxy@black-talon.net

Thanks Ian

Iain P 18 January 2001 07:07 AM

treat yourself...................you know you want to http://bbs.scoobynet.co.uk/smile.gif

Iain P 25 January 2001 06:54 AM

Sketch, got a live e-mail from you but one of the kids was logged on and couldn't remember what it said! Please e-mail me direct.
Cheers

Darren Thompson 25 January 2001 08:26 AM

Ian please send me a price list and styles you can do.

Darren.

GraemeF 24 February 2001 10:48 PM

Ooooh yeah gimme more details , prices, styles etc

Iain P 25 February 2001 09:12 AM

You both have e-mail http://bbs.scoobynet.co.uk/smile.gif

greenking 25 February 2001 12:03 PM

Hi,
Please e-mail me the prices etc.
I am lookin for a smaller import plate with legal lettering please
Regards
G.

DEEDEE 25 February 2001 04:28 PM

I posted a site a few weeks ago regarding number plates. I had the standard size letters and plate but moved the spacing. ie 1234 567 to 12 34567 this cost me £30 and the threat of being issued a Q plate if caught again. So sorry if I affect any orders being placed with Iain P but I feel if you did not see the posting you should be warned.

logiclee 25 February 2001 04:38 PM

DEEDEE,

Passed your car last week in Mansfield, noticed you had put standard plates back on.

I think your Hubby was driving. http://bbs.scoobynet.co.uk/smile.gif

Lee


All times are GMT +1. The time now is 11:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands