ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Private For Sale - General (https://www.scoobynet.com/private-for-sale-general-17/)
-   -   subaru sti version 6 breaking forged engine warranty (https://www.scoobynet.com/private-for-sale-general-17/825208-subaru-sti-version-6-breaking-forged-engine-warranty.html)

marcspares 31 March 2010 07:30 PM

subaru sti version 6 breaking forged engine warranty
 
PLEASE NOTE I HAVE NOW SOLD THE MAIN BLOCK OF THE ENGINE,, I STILL HAVE THE HEADS, CAMS AND MANIFOLD BUT NO BLOCK..

hi
after writing my best mates scooby off ive had to buy the car from him in the state it is, all rear quarter and back damage.
the car is a 2000 subaru sti version 6 as standard, he has just spent a silly amount of money on it at the start of the year,here is the list.

i have a full reciept for the rebuild which still has a 10,000 mile or 12 month warranty (well 9 months warranty left now)
full forged engine rebuild incl
sti 9 crank
weisco forged pistons
weisco forged rods
uprated oil pump
race bearings
red top manifold
throttle body
list goes on totaling a bill of £4450, it is a complete engine bargain £1250

also in the same month the engine was built the 5 speed gearbox was reconditioned again i have receipt for this and again under warranty.£325

brand new asuka lightweight gun metal grey alloys and tyres £395 SOLD

type ra roof scoop ive been told these are very rare and expensive comes with all fixings £190

i have already sold, front bumper,splitter,wings,bonnet,injectors,rad pack,interior,

please call 07570874899 or pm for parts collection from birmingham or can arrange delivery at buyers cost

can send pics of engine and other parts if required pm me your email

PLEASE NOTE I DO NOT HAVE THE TURBO FOR SALE
thanks

Darc174 31 March 2010 07:33 PM

Tx Sent :thumb:

chaos1980 31 March 2010 07:43 PM

Hi what turbo was it running and is it avalible?

marcspares 31 March 2010 07:59 PM

it had a garret turbo on he took that off as it was worth alot and adjusted the price for me.

stedee 31 March 2010 11:27 PM

where are you matey

stephen beynon 01 April 2010 10:13 AM

VERRY INTRESTED IN THE ENGINE WHERE ARE YOU BASED AND DO YOU KNOW IF THE BLOCK IS A CLOSED DECK ONE MANY THANKS STEPHEN

TonyBurns 01 April 2010 10:18 AM


Originally Posted by stephen beynon (Post 9321604)
VERRY INTRESTED IN THE ENGINE WHERE ARE YOU BASED AND DO YOU KNOW IF THE BLOCK IS A CLOSED DECK ONE MANY THANKS STEPHEN

It wont matter if its odb or cdb, as the car is a version 6 STI i would hazzard a guess at a phase 2 engine, and as those are odb I would go with that, though it makes no matter unless you want silly bhp anyway, its a bargain for that price if you ask me, best to see or hear it running :)

Tony:)

marcspares 01 April 2010 10:52 AM

my pal said it is a closed deck block, i havent got a clue really on these engines hes told me to advertise it on here as i will get alot of interest and he seems to be rite.ive told him what price ive listed it for and apparently im stupid but i need to get my money back asap.
it was running 425bhp.
i have the paperwork and tried to post a pic of it but i cant work out how to so contacted the company who built the engine and they have emailed me the work done, ive copied and pasted it but the logo and graphics wont show just the writing. here it is

Job description
Parts used
price
Remove engine, rebore, supply and fit forged pistons and conrods.

Supply and fit new crankshaft,

rebuild with new race bearings and thrust washers,

supply and fit uprated oil pump,

skim both blocks and heads,

overhaul both heads,

supply and fit new valve guides, cut and lap all valves.

Supply and fit new oil,oil filter,cambelt,fan belts.

Change all fluids inlc diff, power steering and brake fluid.
Weisco forged pistons

Weisco forged conrods

Sti 9 crankshaft incl
bearings.

Cosworth oil pump

Hks camshafts

Cosworth 93mm gasket set

Hks ssqv bov

Roger Clarke headers

Cambelt

Fanbelts x2

Castrol 10w 60w oil

Oil filter

fluids, diff,power
steering & brake

TOTAL
Parts
Labour
Total
V.a.t

Subtotal
£454.99

£434.99

£530


£224.95

£347.00

£120.00

£170.00

£195.99

£87.50

£41.90

£40.00

£7.00

£100.00




£2754.32
£1740.68
£4495.00
£786.57

£5281.57























Opening times
9.00am – 6.00pm Mon-Fri
9.00am – 1.30pm Sat




COMPANY REG NO 0605349
V.A.T NO 877838256

Darc174 01 April 2010 11:19 AM

Its a v1/v2 engine as its a CDB with single coil packs,

I was very intrested but I don't think it will work with my ecu setup as I thought this was a sti 6 forged lump

Darc

KickboxingCrazy 01 April 2010 11:42 AM


Originally Posted by Darc174 (Post 9321698)
Its a v1/v2 engine as its a CDB with single coil packs,

I was very intrested but I don't think it will work with my ecu setup as I thought this was a sti 6 forged lump

Darc


any short block will fit your car, i assume seeing as its a STi 6 its in he would be using V2 heads!!

Darc174 01 April 2010 01:18 PM

Engine would fit but I would have to do some messing about to use my coilpacks for my ecu to work. Or change the heads for mine which I don't see the point doing as its a good engine as it is.

So for that money I could forged my block.

Bttt for a spanking clean engine :)

Darc

Mus 01 April 2010 01:20 PM

any pics of the wheels

marcspares 01 April 2010 01:59 PM

wheels
 
i have sold the wheels mate but there is another set of v8 wheels they are 5 spoke in gun metal grey with a blue lip they look real nice with a blue subaru

Mus 01 April 2010 02:17 PM

i got a white one lol out of intrest how much and any tyres with them?

KAS35RSTI 01 April 2010 02:34 PM

Hi mate did you manage to get the gearbox code for me? Also how much for the headers, does it come with a up-pipe?

Cheers

frodobaggins 01 April 2010 02:41 PM

yhpm m8

marcspares 01 April 2010 04:20 PM


Originally Posted by mus 1st class sti type r (Post 9322034)
i got a white one lol out of intrest how much and any tyres with them?


i want £250 for them with tyres only 1 wheel has a bit of damage but dosent effect it

beardy01 06 April 2010 06:25 PM

Hi do you still have the headers

kiranbaloo 06 April 2010 06:49 PM

do you still have the hks camshafts and if so how much?

emp7031 07 April 2010 05:10 PM

yhpm

ukbob 08 April 2010 08:30 PM

hi
how much for the heads complete please?
many thanks neal

ukbob 13 April 2010 07:46 PM

yh 2x pm

garetgax 13 April 2010 07:57 PM

what ecu was it running if its a mafless ecu id be interested i.e simtek etc.

Kieran_Burns 05 May 2010 06:17 PM

Please note that the sellers account has been banned as an unauthorised trader using multiple accounts (one of which was used to post in this thread by mistake)

This account and all the aliases have been permanently banned

This thread is now being closed


All times are GMT +1. The time now is 07:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands