ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   18g with 440 injectors? (https://www.scoobynet.com/general-technical-10/810604-18g-with-440-injectors.html)

Mrchips 17 January 2010 10:57 AM

18g with 440 injectors?
 
I am going for an 18g, what bhp/torque will i get, and will 440's be ok?
Its a classic MY00, sti top mount, FPR, ported headers, full decat, panel filter, paralell fuel mod, oil catch can, colder sparks.

Thanks

Ciaran 17 January 2010 11:13 AM

Your 440's are going to be the limiting factor. They max out about 330-340 depending on fuel pressure which means you would be as well with a 16g which will also make the same power but spools quicker. Alternativly get yourself a set of 550's and you should make 350-360 if not more.

TonyBurns 17 January 2010 11:58 AM

More power you have, the less reliable your car will be, and as we don't know what you want the achieve then its a bit of a guessing game, but as said, td05 16g is better unless you want to upgrade your injectors, then 350bhp is about the max you want to run, and seriously at that level of tune, gearbox and clutch reliablity will be compromised.
I would also look at a vf35 as an alternative to the 16g

Tony:)

WhiteWagonMan 17 January 2010 12:05 PM

Also look at fitting a Fuel Pressure Reg as this will stop the injectors from holding you back,and you will be able to get more power from the 440`s,just done this myself as you will have more chance finding lord lucan than finding 550 injectors for a classic.;)

just noticed you have a fpr,so scrap what i said as you will already know,heavy night last night and the eyes arnt working right today.:)

Mrchips 17 January 2010 06:43 PM

I have a VF35, but its knackered. I had bought it like that, which is a bummer.

johnlogie 17 January 2010 07:04 PM

I have an 18g fitted and 555cc injectors, running 350ish bhp

Mrchips 17 January 2010 07:37 PM

Well my goal has always been 330 ish. But keep getting different ideas. I'd like a quick spool up.

With the vf35 i have its ok, but as said before its not right, as only getting 261 with 275 torque. and doesnt go right round the rev range about 5000 is its limit.

Slowboy Racing 18 January 2010 08:47 AM

Sure the turbo is the problem ? A good VF35 will work well for what you want, fast spooling around 330-350 on a good set up.

trails 18 January 2010 02:11 PM

if it's still on standard internals your bottom end is on borrowed time, an 18g will kill it at some point...its a great turbo but make sure you go into this with your eyes open :)

Mine was great for 18months ;)
http://img.photobucket.com/albums/v4...s/IMG_2637.jpg
http://img.photobucket.com/albums/v4...s/IMG_2659.jpg

StickyMicky 18 January 2010 02:31 PM

At one point my 440`s were running 110% duty on a 16g, so i suspect an 18g will destroy them ;)

After optimizing the map a little, i got this down to 98% lmao

johnlogie 18 January 2010 05:39 PM


Originally Posted by trails (Post 9164853)
if it's still on standard internals your bottom end is on borrowed time, an 18g will kill it at some point...its a great turbo but make sure you go into this with your eyes open :)

Mine was great for 18months ;)
http://img.photobucket.com/albums/v4...s/IMG_2637.jpg
http://img.photobucket.com/albums/v4...s/IMG_2659.jpg



Ouchhh!!!!


I suspect mine will be looking a bit like that soon, lol

trails 18 January 2010 08:24 PM


Originally Posted by johnlogie (Post 9165306)
Ouchhh!!!!


I suspect mine will be looking a bit like that soon, lol

Well I wish you the best with it :thumb:

New_scooby_04 19 January 2010 10:43 AM


Originally Posted by Mrchips (Post 9162588)
I am going for an 18g, what bhp/torque will i get, and will 440's be ok?
Its a classic MY00, sti top mount, FPR, ported headers, full decat, panel filter, paralell fuel mod, oil catch can, colder sparks.

Thanks

As said above, this is not the right turbo for you (assuming your running std internals).

VF34/35 the way to go, quicker to spool, will max out your 440s and less chance of you smashing your transmission (and possibly engine) to bits.

PS you should also be looking at upgading your std fuel pump if you've not done so already.


All times are GMT +1. The time now is 03:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands