22mm whitline rear arb and alloy links rubbing
 

Had a 22mm whitline rear arb and alloy links fitted back in march last year and all has been fine.But on the mot today we have found that the off side has been rubbing on the bar where it loops down.I have done a search not found a lot.I have checked the part numbers as i kepted the box's with Whiteline's site and they apper right.Should it have the Steel links not alloy.Here's a couple of pic's any advise would be great.
http://img683.imageshack.us/img683/7025/arblink2.jpg
http://img704.imageshack.us/img704/6483/arblink3.jpg

are both sides the same ?

The links are the same for both side's but the arb is stright on the nearside so does not hit.

the arbs can move I know some use jubilee clips and a small bit of garden hose on the outer sides of the brackets, If u push/pull on the arb it does move side to side,
Would this help ?

It does not seam to move first thing i tryed :cry:

Couple of decent sizes washers to space it out a bit....

Simples !

dunx