car started badly smoking
Hi my car s just started heavily smoking very dark grey
ideling funny like its hunting and doesn t want to rev like normal theres no engine light come up I no its hard to diognose with out seeing and hereing but any info would be really helpfull thanks in advance pete |
Are all your vacum/boost pipes on properly? When my FMIC pipe came off i had a similar problem. Is the car stalling?
Also what year, model & spec is the car? |
yes stalling badly its a 96 wrx
fmic apexi induction kit walbro pump and cat back |
do a compression test, make sure they are ok and as above check all connections
|
Originally Posted by pete96wrx
(Post 9152855)
yes stalling badly its a 96 wrx
fmic apexi induction kit walbro pump and cat back |
going to go and check all hoses. do you mean cylinder compression check mje wrx
if it is how hard is it to do cheers pete |
only took the car around the block and dont think it was smoking when i left
car was reving fine and freely when i left only done about a 1/2 mile then turned for home.now the more it revs the more smoke apears |
yeh cylinder , its easy providin u can get a tester kit, remove spark splugs, screw tester into 1st chamber, food flat on accelerator and turn over engine, take reading, they shiuld all be simular. also check all ur breathers, make sure they are ok, and also check oil, see if its using any, check water tank for any oil. do all simple checks first. clean iacv.
|
going to get a tester kit tomoro.will the compresion test show gaskets or possible ring or both
|
will show rings, is the car trying to over heat at all. most garages will check ur compression, save u money buying a kit, that u may use once. are u using water or oil at all, is the top radiator hose solid when warm or still squeezeable
|
when warm the hose becomes harder to squeeze but not totaly solid.dont seem to be loosing any oil or water
checked all hoses etc and one of the fmic tubes had come loose going to double clip it. just noticed a faint rattle more like a ticking when you gentle blip the throttle it speeds up with it and its not going away when cars warm either.sounds coming from turbo corner. |
cud be turbo failing, that can cause smoke, get it to a garage so they car check it, i use a car stethescope to pin point any odd noises
|
Originally Posted by mje_wrx
(Post 9153222)
cud be turbo failing, that can cause smoke, get it to a garage so they car check it, i use a car stethescope to pin point any odd noises
|
Originally Posted by pete96wrx
(Post 9153185)
when warm the hose becomes harder to squeeze but not totaly solid.dont seem to be loosing any oil or water
checked all hoses etc and one of the fmic tubes had come loose going to double clip it. just noticed a faint rattle more like a ticking when you gentle blip the throttle it speeds up with it and its not going away when cars warm either.sounds coming from turbo corner. Isit like a ringing noise/whining noise? Possibly could be that the shaft on the turbo has play. Which turbo do you have? |
god i hope so could stretch to a new turbo,bottom end would hurt right now
thanks for all the info it s much appreciated going to do a compresion test anyway what kind of readings should i hopfully get and how much fluxuation is normal per cylinder pete |
its a tdo5 i think. its got the 90 degree upturn on it
its not a ringing/whining ,sounds like a tapping kind of noise its there on idel and speeds up when you gentley blip throttle then a split second it disapears and its back. |
that cud be a heat shield or something, and now ur paranoid ur hear everything. im not sure what the psi shud be on cylinders off hand. il have a look for u
|
Originally Posted by mje_wrx
(Post 9153281)
that cud be a heat shield or something, and now ur paranoid ur hear everything. im not sure what the psi shud be on cylinders off hand. il have a look for u
|
cheers mate just done a utube search and it dont sound like bigends(touch wood)
going to have to get it checked those just in case.going to check all the heat shield etc first |
let me know how u get off
|
paranoid state over thing i sorted it
the tappings coming from actuvator arm.when i hold where its joint to the turbo and hold it tight it pretty much stops apart from manifold heat shield slighty flapping so major panic over.thanks for all your advise helped loads mate pete |
mine has that tap noise sometimes mate is it running better yet mate
|
running great now mate. boosting fine no smoke.
glad to here its not just mine ticking those |
a nice resolve for you pete.... and well done to the diagnosis !! :) - i like stories like this :)
|
Originally Posted by pete96wrx
(Post 9155263)
running great now mate. boosting fine no smoke.
glad to here its not just mine ticking those but at least u get a start point lol |
big weight off my mind got to admit at one minute thought i might have to sell one of the kids lol. thanks again for all advise it nice to know there s help out there when you need it
pete |
All times are GMT +1. The time now is 07:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands