ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Styling (https://www.scoobynet.com/styling-36/)
-   -   hawkeye Finned rear spoiler? (https://www.scoobynet.com/styling-36/808395-hawkeye-finned-rear-spoiler.html)

K33VRN_RB320 05 January 2010 12:18 AM

hawkeye Finned rear spoiler?
 
saw a finned rear spoiler on a RB320 looked exactly the same as the standerd one just with the rally style fins in it, looked amazing imo, does anyone know where i could get one from? had a search only some came up but not the correct ones.

cheers guys :)

K33VRN_RB320 05 January 2010 12:23 AM

may have been this one not sure as they took the listing off of pistonheads :( had some nice APs too

Version 8 Finned rear Spoiler 01 - 07 WRC STi Impreza on eBay (end time 05-Jan-10 11:07:48 GMT)

STI Mav 05 January 2010 02:10 PM

Think it's more likely you have seen a spoiler with the Perrin Wing Stiffies installed. These can be had for £45 each from Perrin and are literally slide in and bolt into place (so i'm told.....)

K33VRN_RB320 05 January 2010 02:55 PM

possibly, pretty sure it was still the standerd spoiler with fins, do you know where i can pick these up from dude? done suppose they do them in carbon do they?

STI Mav 05 January 2010 04:06 PM

There were some going on Ebay the other day not sure if they are still there.

Otherwise - TSL MOTORSPORT | Subaru Saab Mitsubishi | parts | repair | servicing | performance tuning | UK

K33VRN_RB320 06 January 2010 02:48 AM

awesome cheers dude

K33VRN_RB320 06 January 2010 04:24 PM

do they do carbon versions on these you know?

STI Mav 06 January 2010 07:23 PM

Not that I'm aware of fella - only seen these ones on offer....

Hammer man 07 January 2010 10:18 AM

Is this what you saw?:thumb:
Roger Clark Motorsport - RCM Product Detail

K33VRN_RB320 08 January 2010 03:19 AM

ha yer at that price ide have to say no lol! 2k for a replica spoiler :/

pete ppp 12 February 2010 11:17 PM

Not replica brand new sti spoiler with precision made fins installed. Roger Clark sells quality ****. If i had money i would be there tomorrow.

GezP 14 February 2010 07:09 PM

Be careful of the Perrin stify's. If you have a replica spoiler, the bottom of the perrins don't exactly fit flush. They still fit and look amazing but do have a slight gap. I have a really good replica spoiler from scoobyworld and there is a slight gap (probably never notice it). The genuine spoilers subaru spoilers have markings and holes ready for the perrin screws.

You will need to take the spoiler apart to slide them in other wise you'll scratch and scuff the spoilers paint work trying to get them in. Real easy job though, plenty of tutorial vidz on youtube

I would recommend getting them

pete ppp 14 February 2010 07:53 PM

I like this spoiler on ht autos.

http://www.subaru-impreza-body-kits....c.html?sno=298


All times are GMT +1. The time now is 09:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands