ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Are all subaru yellow injectors 440cc (https://www.scoobynet.com/general-technical-10/806061-are-all-subaru-yellow-injectors-440cc.html)

Clarkie GT 20 December 2009 04:36 PM

Are all subaru yellow injectors 440cc
 
as title, i ask cause i've seen 2nd hand yellow injectors advertised on ebay as V2 440cc. i thought all V1 and V2 imprezas have 380cc?

and i saw a while back a fuel rail advertised with a bosch 3.5 bar fuel pressure regulator fitted insted of the standard one, where can i get one of these from? ive dont a couple of searches and had no succses

winker 20 December 2009 04:40 PM

i thought that to 440 yellow i had on my version 4 sti type r my version 2 i think are 380

bolasti 20 December 2009 04:43 PM

think 440s yellow pal,standered in late uk cars my 99/00

Clarkie GT 20 December 2009 04:45 PM

SUBARU IMPREZA WRX STi 440CC PHASE 2 YELLOW INJECTORS on eBay (end time 15-Jan-10 11:50:32 GMT)

P555SBR 20 December 2009 04:46 PM

subaru yellow injectors are phase 2 in relation to the fuel rails v1 and v2 have phase 1 fuel rails and need an adaptor kit to fit phase 2 injectors

Clarkie GT 20 December 2009 04:48 PM


Originally Posted by bolasti (Post 9109931)
think 440s yellow pal,standered in late uk cars my 99/00

thats what i thought, so why are these advertised as V2?

brashy 20 December 2009 04:57 PM

yes mate the v2 injectors will fit but as (p555sbr) says u do need a kit, what it is is a sleeve that sits over the end of the injector that makes it fit into the v1 injector rail plus the v2 injectors sit a little higher than the v1 so you will have to put a few washers on the caps that hold the injectors in, they are about £30 ish i think

Clarkie GT 20 December 2009 05:28 PM

so they are 440cc apposed to 380cc? basicly i have a V2 wrx and need bigger injectors (aiming for anything over 320bhp) i saw these and thought it odd that they're advitised as V2 and 440cc as i thought all V2s had 380cc?

brashy 20 December 2009 06:15 PM

must be v2 sti mate an if you want to get over the 320bhp you will probly have to change the maf sensor for a z32 maf but make sure when u buy 1 its come with the plug as well coz you will need to change it for yours

Clarkie GT 20 December 2009 07:02 PM

but dont ALL V1 & V2s have 380cc?

AndyForrestPerformance

brashy 20 December 2009 07:15 PM

yes mate as far as i no i think its just sti's that have 440s

Clarkie GT 20 December 2009 07:39 PM

ok, brilliant, thanks pal. is the z32 maf off a sti too?

jeffwrx 20 December 2009 07:50 PM

i'm selling these v1 /v2 440's if your interested , cheers

Subaru impreza 440cc yellow sti injectors and rails on eBay (end time 27-Dec-09 19:40:38 GMT)

Clarkie GT 20 December 2009 07:55 PM

ah, perfect jeff. im in the midlands tho, any chance of postage? not really worth traveling 200miles for really

jeffwrx 20 December 2009 08:47 PM


Originally Posted by Clarkie GT (Post 9110293)
ah, perfect jeff. im in the midlands tho, any chance of postage? not really worth traveling 200miles for really

yes can post, no problem , cheers

Clarkie GT 21 December 2009 05:48 PM

thats actually got me worried, i always thought all V1 and V2s had 380cc, including STI. so i put a TD05 and STI ecu on my V2 wrx wagon :(

Scott.T 21 December 2009 08:54 PM

All Pre96 WRX and STi had 380cc injectors
97/98 WRX and UK also had 380 injectors
97/98 STI and 99> Classic all have 440cc injectors.

97/98 STi with Yellow 440's are Phase 1.5 fuel rails that will fit Phase 1 rails.
Phase 2 rails injectors from 99> will also fit Phase 1 rails but need £30 adaptors from Carl Davey, Zen or Lateral.

Grant74 21 December 2009 10:51 PM

sorry to jump in on this, but Im trying to work mine out too!

Mine is a UK 98 Classic WRX, which I understand is Phase 1.5 apparently. Im after larger injectors, but dont know if I need top or side feed, and which injector types will fit?

All help appreciated.

thanks

Grant

Scott.T 22 December 2009 01:43 PM


Originally Posted by Grant74 (Post 9112381)
sorry to jump in on this, but Im trying to work mine out too!

Mine is a UK 98 Classic WRX, which I understand is Phase 1.5 apparently. Im after larger injectors, but dont know if I need top or side feed, and which injector types will fit?

All help appreciated.

thanks

Grant

Side feed and more likely to need rail adaptors to convert the phase 2 injectors to fit the phase 1.5 rails
there are some large phase 1/1.5 out there on ebay but tend to be cheap and modified for extra flow. I would never recommend a cheap injector as it's critical to maintain engine life.

The only modification for extra flow I would trust would be from lateral.
They can modifiy 440's to run approx 800cc, they should be able to do the same for the 380's

Lateral Performance Ltd| Home | Subaru Impreza Fuel System | Injector Services | Side Feed Injector Hi Flow Modifying, & Flow Matching.


All times are GMT +1. The time now is 05:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands