Blobeye front bumper question
 

Wont be long until I'm getting my splitter painted and fitted which is great I cant wait :)
However it leaves me with a slight problem re: my zunsport lower grill. The splitter has a lip that goes over the bottom of the existing bumper and gets bonded on, meaning that the lower gap that the grill is designed to fit will now be smaller (see blue arrow) and I'm assuming the grill wont fit

If it doesn't fit, I'm wondering whether the black plastic bit (excuse my technical terminology!) behind the numberplate (as you look at the bumper from the front) could be cut to make the extra gap see (red arrow)

Need some advice please!

http://i535.photobucket.com/albums/e...DSC00662-1.jpg

It can be cut, and a lot of people in the states cut it out completely... hope that helps.

Don't cut the splitter, as you could give me the grill and i would be happy :lol1:

am currently looking to swap the grill for a pair of fog light covers if you have some ;)

Have got drivers side fog cover in silver if any help.

Wouldn't mind the grill myself tbh.

you can cut it out have just done mine to allow for front mount intercooler, used an air saw but it does cut with a stanley knife bekeive it or not!! just need a steady hand and lots of patience!!