ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Key stuck in ignition! (https://www.scoobynet.com/general-technical-10/792702-key-stuck-in-ignition.html)

kz-scoob 01 October 2009 12:31 PM

Key stuck in ignition!
 
Hi my bro just phoned me to say his key's stuck in the ignition and he can't get it out! Don't know what to suggest other than the obvious... has this happened to anyone else? Any ideas :Suspiciou

M-reg classic btw!

kz-scoob 01 October 2009 12:33 PM

Ahh...

He just called to say he has now snapped the key off, and it's stuck in the ignition.

Fuuu! Guess the situation has just been made 100x worse :cry:

scooby546 01 October 2009 12:36 PM

Haven't had this happen to me, but might be worth trying to start the car again then turn it off to see if that frees up the key - sure they have tried turning the wheel a bit to ensure its not jammed against the steering lock mechanism. Also make sure they aren't turning the key back too far; mechanism may be worn a bit and allowing the key to turn back too far so it can't be removed?

Hope that helps

scooby546 01 October 2009 12:36 PM

Nightmare! Hope they get it sorted - may need new lock barrel etc. if they can't remove the old key :(

Glowplug 01 October 2009 12:38 PM

Happened to me on a BMW a few years ago, turned out the barrel has collapsed, new lock set was required.

alcazar 01 October 2009 01:20 PM

Used to happen on my classic, turned out the key was worn. New key cured it.

kz-scoob 01 October 2009 01:40 PM

Thanks guys. He seems to think a locksmith will come out and get the old key out and cut a new one for £70... I guess that's worth trying first?

scooby546 01 October 2009 02:53 PM

If they can get the old key out then possibly, but if the barrel has collapsed then it may be stuck fast, or won't work even with a new key. May be worth a try though...

fastmike 01 October 2009 05:26 PM

SUBARU complete lock set with keys on eBay (end time 08-Oct-09 13:17:44 BST)
Mine did the same and I ended up buying a new lock set and keys

dj219957 01 October 2009 06:56 PM

mine did this. i eventually got it out. all the keys were worn. so i dissambled the barrel and re-shaped the levers. now it works a treat.

He can get whasts left of that one by disasembling the barell (quiet easy) and then using the master key. i wont explain on a forum how its done. but you can pm.

kz-scoob 02 October 2009 01:04 PM

Thanks for your help guys. Just to let you know he managed to get it turned on again so drove it to a locksmiths this morning. £50 later it's out, new key, and all seems to be working fine so far :thumb:

Hopefully it was just the key then!

dj219957 02 October 2009 05:20 PM

just a worn key then eh. take it they cut a new one from the not so worn master key.


All times are GMT +1. The time now is 06:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands