PM'd you back, Andy.
|
Payment sent mate via paypal :thumb:
|
il have one you have pm
|
Originally Posted by uklee
(Post 8952459)
Payment sent mate via paypal :thumb:
Can you confirm your postal address please via the same email that you PayPal'd? Thanks mate.
Originally Posted by IMPORTPETE
(Post 8952869)
il have one you have pm
|
payment sent mate pmd you delivery details cheers pete
|
Sent email mate :thumb:
|
PMs replied to :)
@Lee: Got it mate, your chip should go out tomorrow. @Pete: Yours too. |
Hi you have PM and e mail pls contact me cheers
|
Hi there, do you have any chips left
|
I was a complete div and I sent a couple of chips out without instructions. Please accept my apologies guys :brickwall
PMs with a link have been sent. |
Originally Posted by jgodders
(Post 8958599)
Hi there, do you have any chips left
|
getting mine fitted this friday as i have to solder the socket in but any more feedback from those who have fitted them cheers pete
|
Got it fitted today Yeee Haaaa unbelievable cant get nothing like this anywhere for 100 quid thanks steve :D :thumb:
|
Excellent mate, glad your car's improved bud :)
|
cant wait now il post up once iv fitted it friday tbf heard nothin but good things so far goin for rr day soon to so hopefully will have a few more horses.
|
gf8 3B ecu
Hi i have a Impreza Wrx gf8 1996 with ej20g engine and a 3b ecu as i know my engine has a Td04 turbo but im planning to upgrade to a Td05 i just have changed the down pipe with straight 3" tube to tail an up-pipe and a manual boost controller iridium spark plugs and soon to change the fuel pump to walbro high flow and upgrade the injectors, will this chip fit my car with this mods? if yes how can we contact for me to send you the money, well thanks for your help.
|
Renegado, yes, the chip should fit, but you need to check to see if your car has the intercooler square to the bulkhead (not chippable) or angled (chippable).
If your car still has the factory boost control solenoid, it would be worth removing the manual boost controller as the ECU when remapped will control the increased boost. Also, no point in you buying a chip until you've done the turbo swap ;) |
fitted today didnt think much had changed at first but took it out this evenin and it came alive for some reason, a lot more pull on boost and going up through the gears 3rd just seems to pull n pull excellent very happy with it thanks again
|
Excellent :)
|
you have pm mate, i want one!!
|
Sorry for the delay in answering PMs. Been very busy the last couple of days, I will get to it! Bear with me.
|
shame these dont fit my MY98 sti....
|
After getting mine fitted properly, it seems to be driving very well. Seems more powerful lower down the rev range, and more pull through the gears, bearing in mind I still have a completely standard engine, and standard downpipe!! Thanks again mate.
P.s is it alright to run on RON99, or only RON97 fuel? |
99 RON's fine mate. Glad to hear it's working nicely for you :)
You will definitely feel the benefit more with some basic breathing mods. |
Fitted this chip to my totally standard MY96 UK wagon......
OMG ...best £100 i've spent, this is some serious bangs for the buck and again im running standard downpipe etc etc. Pulls like a train from lower down the revs, will top a ton in 3rd before u can blink! Really easy to fit even for a pencil monkey like me The best advice i can give is...GET ONE!!! |
Originally Posted by Major_Sarcasm
(Post 8985255)
99 RON's fine mate. Glad to hear it's working nicely for you :)
You will definitely feel the benefit more with some basic breathing mods. Excellent, I know, can't wait to get a decat downpipe in :D |
YHPM, :)
|
PM's replied to :)
|
Hi mat can i get one of the chips mat.
The car is a 96 wrx import running a z4 td05 turbo decat system and a hks panel filter. thanks john |
Hi John, check that your intercooler is angled to the bulkhead and not square on. If it's angled, PM me and we can go from there :)
|
All times are GMT +1. The time now is 01:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands