ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   RHD to LHD (https://www.scoobynet.com/interior-15/748776-rhd-to-lhd.html)

shredda 24 February 2009 08:50 PM

RHD to LHD
 
Hello

I am a new Impreza owner. Since I live in a country that doesnt allow RHD cars to be registered I have to convert it.

Here is my question to you.

Can you help me find people and advice what I need and what I need to consider when doing this task. The mechanical skill is no problem but its my father's so I need to find as much information as possible to help him.

Thank you very much.

Pic of my car(RA v4 v-limited) I HATE the fact I have to make it LHD :freak3:
http://images.orkut.com/orkut/albums...c7jgCFzSpQ.jpg

Connor_scotland 02 March 2009 11:56 AM

black the front windows out so you can travel in disguise :-).

Im not sure mate hopefully someone on here can help

xuixo 02 March 2009 01:21 PM

ScoobyClinic does it but you will have to provide a LHD car as a donor and it won't be cheap.

Daniel Hrubý also does it.

daniel.hruby@carter.cz

He has done a lot of convertions and i think he's the right men for you but i guess you will have to take the car to the Check Republic. Try to send him a mail.
good luck mate.
Xuixo

tanyatriangles 02 March 2009 04:33 PM

I can't even begin to think what this would cost. Wouldn't it be cheaper to SELL the car and buy a LHD? Surely they exist?

rbaz 02 March 2009 04:50 PM

They didn't make LHD classic STIs I believe Prodrive converted the ones for rallying.
Would be best getting hold of a damaged LHD turbo and convert it that way.

Turbovin 10 January 2010 09:48 AM

How is this going? I'm thinking about doing this operation myself and would like to know everything that needs to be swapped.

The things I know about are:
steering rack
dash
pedals
windscreen wipers (complete mechanism)
wiring for lights, repeaters etc.
A/C piping relocation
heating conversion as JDM is digital unit, or changing it for a EUDM unit

How do all the rally people do this operation? Do you swap the whole firewall/bulkhead or do you just drill new holes and weld the old ones?

Do you need to change the airbag wiring looms if you want to keep them? I have airbags on both sides.

I know this is going to cost a lot and be time consuming but I think it would be worth it.

shredda 10 January 2010 07:26 PM

My car is done and driving from july now... did the job with my dad, nothing that complicated. 6 full days of work and it was driving, then some minor things as i had time :luxhello: Runs like new :cool:

Turbovin 11 January 2010 05:16 AM

Sounds good. Did you have a complete LHD donor car that you could use parts from? Did your RA have AC and airbags?

shredda 11 January 2010 07:09 AM


Originally Posted by Turbovin (Post 9149664)
Sounds good. Did you have a complete LHD donor car that you could use parts from? Did your RA have AC and airbags?

Unfortunately not. i just got the parts and some minor things are still missing as we speak. Yes I had the JDM digital AC. The steering wheel was replaced before I got the car so no airbags for me to play :D

Turbovin 11 January 2010 09:21 AM

Okay, I called a company here in Sweden and it would probably be something like 3500 euro for the rebuild including parts.

Unikat 11 January 2010 10:37 AM

Hi,
Can you tell me please what company is it? You can send me PM also if you want. Thanks a lot.

Jaka

Turbovin 11 January 2010 11:24 AM

Hi it's www.jobparts.se . Price depends on how much needs to be done, airbags, air condition etc.


All times are GMT +1. The time now is 10:17 AM.


© 2024 MH Sub I, LLC dba Internet Brands