breaking classic wrx (93)
 

Powerflow exhaust turbo to backbox SOLD:)
OS wing code 262 silver SOLD:)
low level spoiler SOLD:)
bootlid SOLD:)
rear bumper SOLDhttp://images.ibsrv.net/ibsrv/res/sr...lies/smile.gif
front bumper SOLDhttp://images.ibsrv.net/ibsrv/res/sr...lies/smile.gif
both bumper irons £15 each
air con rad £25
air con pump £15
rear diff £50
front driveshafts £15 each
2 doors left £20 each
clutch master cylinder £10
servo/brake cylinder £40
steel bonnet code 406 SOLD:)
front 2 pot calipers SOLD:)
crankshaft SOLDhttp://images.ibsrv.net/ibsrv/res/sr...lies/smile.gif
timing pulleys/idlers SOLD:)
timing belt tensioner SOLDhttp://images.ibsrv.net/ibsrv/res/sr...lies/smile.gif
OS front fog SOLDhttp://images.ibsrv.net/ibsrv/res/sr...lies/smile.gif
power steering rack £20
prop shaft £20
oil pump £10
loads of interior trim parts - just ask
rear wiper motor £10
front wiper motor £10
rear washer bottle and pump £5
abs ecu £25

if its not listed just ask i may still have it

Hi is this a wagon?

no mate saloon, do have a wagon, what do you need?

I'm after the plastic cover that fits over the wagon roof rail mounting - driver side front. Cheers

ah i see, as it happens i will be removing the rails and using the roof strips from the saloon, but i would want to sell the rails complete, so would want about £30 mate for both rails

aup mate do you have a drivers side fog light for a 92 classic?

no sorry mate both fogs have been sold, if i could get some cheapish fog covers id be tempted to sell them from my 96 wagon (they'd be the same)

hi mate what colour is the car?? interested in the back doors mate thanks

colour is silver, code 262, very similar to 406 so similar that i can hardly notice the 262 bonnet on my 406 wagon

Hi mate do have any lowering springs

will they fit a 1996 model impreza saloon??

exhaust
 

is the exhaust all stainless without the cats?

they're off a saloon mate

no sorry just std ones

downpipe cat still there then stright thru to backbox

do u have the air box and the piping for the boost solinod?

no to the air box, the piping for the boost solenoid probably i sold the 3 port but the piping i probably still have give me an exact desciption (i am new to scoobies) but i have a wagon so i can look whats on there and understand what you need, then i can send a pic so you knw its defo what you need

cheers

do you have to 2 hoses that go from the block, throgh the bulkhead to the heater matrix?
Price posted please.

yer im new to them to.lol

on the near side front wing strut u would look straite at the noid there was 3 pipes connected to it here is a link to another topic which shows the 3 pipes on it

https://www.scoobynet.com/general-te...bar-boost.html

yes i do although the foamy looking stuff is a little tarnished now, but the hoses are A1

£15 should do it

let me know

do you need all three pipes in the pic, if so £10 i'd say

need until sunday to look at my wagon in the light to make sure you get the right hoses, ill match them up


let me know

Alloy wishbones? price for a pair please

Sold mate

that would be great mate just pm me ur paypale details mate and ill send u the money and my address if that cool with u:thumb:

yhpm

Rear diff
 

What code has the rear diff casing got on it. It should have a little gold lable on it with a 2 letter code starting in T. Do you also have the rear half shafts and hubs. Thanks

diff casing has the code 'TM' on it, hubs and shafts not available now mate

Hi Mate,

Do you still have the power steering pump and reservoir and are they in decent nick??
And on the outside chance, I'm looking for the rolling load liner shelf that fits over the boot on a wagon. Do you have one in dark grey??

Cheers

yhpm

hi are the pullys and idlers standard or alloy //cheers pal