ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   cambelt change (https://www.scoobynet.com/general-technical-10/734427-cambelt-change.html)

donz1 28 December 2008 07:16 PM

cambelt change
 
Hi , i am going to be getting my cambelt changed next week and was wondering if it is worth getting my oil pump and water pump changed at the same time or is there a way to to get them checked while doing the belt.
my car has done 90000 miles.
thanks

dj219957 28 December 2008 09:49 PM

im having my belt done tommorow, im going to ask the garage to check water pump and oil pump too. ill let you know what they say/ how they check. apparantly the backing plate on the oil pump can come loose and cause problems.

saxx 28 December 2008 11:02 PM

i wouldn't worry about ur water pump too much, i've never have one fail on me. but change of oil pump is highly advised. i bought an uprated one from a company called advanced automotives in bristol for £140 plus postage. well worth it. i spoke to a guy called nick in the workshop, he gives only the best information. if u ring him and ask him he will advise u best. here's his number: 0117 967 2344. tell him that u got the number from a guy called saxx

dabow 28 December 2008 11:36 PM

the water pump can go. i find if theres no play at all. then it should be fine. shouldent be to loose either.

regards to the oil pump. you may not need to change it
but worth doing, as aboth. try and get an uprated one if posable.
i had one go on me.

these belts are quite easy to change too

dj219957 29 December 2008 10:38 AM

the garage are doing mine now. they are taking the oil pump off to check the backing plate, then they have to locktight it back on. they also agreed that they check the water pump anyway.

minty 29 December 2008 11:20 AM

is the oil pump just a couple of bolts then if your already doing the cam belt? (obv once the oil is drained from the engine)

Jolly Green Monster 29 December 2008 11:27 AM

crank seal is worth changing as they tend to fail arounf 100k..

also check the cam seals.

Simon

dj219957 29 December 2008 11:34 AM

yes i think the pump is just bolted on with a couple bolts. no need to drop the oil from the engine as i understand. just plug/catch what is lost and top up after.

donz1 29 December 2008 09:53 PM

can anyone tell me if it is a big job to change the oil / water pump and how much a water pump will cost.
thanks

mit 29 December 2008 10:18 PM

Water pumps can be had for £40.
The best place/price i found a modded oil pump was Api.It comes with a new crank and oil seal It's in red wrinkle paint too!
The oil pumps easy if you can get the toothed pulley off, which can be a mare! Just make sure you use some good gasket sealant when re-fitting it.
Water pumps easy enough, but i never changed it, as it was fine.

Mit

The Rig 29 December 2008 11:52 PM

id like to do the belt myself as i have on a few cars but they have been normal in line 4 engine with the belt on the side etc,not the loooong belt our scoobs have.

got quoted £210 from a subaru dealer for the cambelt job,considering the belt is like £70 £140 for the jobs labour isnt too bad really

i always get a bolt round off which aint good is it ha ha

STI_Baly 29 December 2008 11:55 PM

Well this might help if you do consider doing the belt yourself.....

YouTube - Changing a subaru impreza timingbelt cambelt


All times are GMT +1. The time now is 03:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands