Cosworth parts with a discount for SN chaps
At least 10% off for this stuff, and some of it surprisingly inexpensive to start with! - all prices INCLUDE vat @ 15%
Big end bearings £46.05 Mains (rear thrust) £59.40 also ACL centre thrust mains (not supplied by Cosworth) £74.60 Head gaskets EJ20 .7mm and 1.1mm £115 the pair. Head gaskets EJ25 .7mm and 1.1mm £115 the pair Head gaskets EJ25 1.5mm £126 the pair. Billet Belt guide £40.25 Baffle Plate £166.75 Kevlar Timing Belt £118.45 Valve Springs £199.57 Ultra Head Stud Kit 11mm 260,000psi £285 Also the usual serious stuff, including; 12mm Rotor Oil Pumps £299 Intake Manifolds £600 EJ25 2.6 stroker kit, billet and forged £3870 EJ25 short block forged with OE crank £3370 2008 STi Front Mount Intercooler £1385 Etc. Alan Jeffery - Engine Tuner 01752 345880 |
Can you stash me a 12mm oil pump please !
A pair of head gaskets and a set of mains + big ends. As per earlier PM. 2002 STI Type UK, I'm not sure where thrust's are tbh ! Many Thanks, Duncan |
Done deal mate...
|
Hi Alan, you've got PM
|
Many thanks, and no doubt yet more parts....
LOL dunx |
is this still going on? after the ultra high tensile headstuds 260,000 cheers.
|
Originally Posted by eggy790
(Post 10371509)
is this still going on? after the ultra high tensile headstuds 260,000 cheers.
|
That's very true! In fact I've had a full body transplant since then. I have to say I preferred the one I had, so it's going back for credit.
Re Cosworth, I think the pricing strategy is similar to the old party game of "stick the tail on the Donkey" Hence the price increase to £388.50 for the high tensile stud kit. It's worth bearing in mind that the 14mm conversion, which is the next move on, costs much more than this. I can supply them from stock at £350, which includes carriage and vat. http://i49.photobucket.com/albums/f2...08_general.jpg |
Originally Posted by Alan Jeffery
(Post 10371892)
That's very true! In fact I've had a full body transplant since then. I have to say I preferred the one I had, so it's going back for credit.
Re Cosworth, I think the pricing strategy is similar to the old party game of "stick the tail on the Donkey" Hence the price increase to £388.50 for the high tensile stud kit. It's worth bearing in mind that the 14mm conversion, which is the next move on, costs much more than this. I can supply them from stock at £350, which includes carriage and vat. http://i49.photobucket.com/albums/f2...08_general.jpg |
Alan, if you can throw in a cosworth billet timing belt guide in aswell for 400 delivered, pm me your payment details and its a done deal :P
p.s. in your opinion what sump would you use for a 600bhp 2.1... my uk sump and the cosworth baffle plate you have above or convert to twinscroll sump? fast road, and the odd sprint car.. Cheers Eddy |
PM'd !
|
pm replied. Many Thanks :thumb:
|
How much for a baffle plate shipped to Denmark?
|
Originally Posted by Empty
(Post 10380650)
How much for a baffle plate shipped to Denmark?
|
All times are GMT +1. The time now is 11:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands