top speed uk my97
hi all im not expecting a rapid response due to how slow site is running at present.but the car isnt being driven untill questions are answered just in case.
so here goes,supposing i have a friend who on a private piece of road managed to get around 140mph out of his impreza,and then a few weeks later his gearbox gave up and had to have a rebuild on it,for the rebuild he had to have a third gear fitted to repair it,and that gear came from a wrx import ans was fitted into a uk spec.and then the car drove fine,however when he visited the private land again his top mph was only 120! coulod this be down to the new gear that was fitted or is it likely to be some other problem? |
As it was only third gear that was changed, must be something else.
|
thanks s70rjw.any other ideas guys does seem to drive fine but a 20mph loss is slightly worrying.
|
The speedo is run off the gearbox, is all this connected back up ok? it will have been disconnected when the gear work was done.
hth Brett |
Melted piston.
|
sounds like a its a type r 5th gear. def sure they refitted the correct box or gearset?
what were the revs doing at 120? |
Sounds to me like the whole import unit has been put in.
Is there be any serial numbers on the casing that could help? |
Originally Posted by scoobynewbie72
(Post 8193617)
The speedo is run off the gearbox, is all this connected back up ok? it will have been disconnected when the gear work was done.
hth Brett
Originally Posted by Red Rocket 11166
(Post 8193657)
Melted piston.
Originally Posted by Tidgy
(Post 8194684)
sounds like a its a type r 5th gear. def sure they refitted the correct box or gearset?
what were the revs doing at 120?
Originally Posted by dan83590
(Post 8194817)
Sounds to me like the whole import unit has been put in.
Is there be any serial numbers on the casing that could help? thanks for the help guys it is gladly received. |
Originally Posted by Tidgy
(Post 8194684)
sounds like a its a type r 5th gear. def sure they refitted the correct box or gearset?
what were the revs doing at 120? the revs went to 4600 rpm at 120mph does this help in anyway? |
Originally Posted by flat4 to the floor
(Post 8201451)
hiya tidgy.
the revs went to 4600 rpm at 120mph does this help in anyway? |
Originally Posted by dan83590
(Post 8194817)
Sounds to me like the whole import unit has been put in.
Is there be any serial numbers on the casing that could help? |
A WRX gearset would be approx 20mph/1000rpm ballpark (my 1995 was)
120mph was at 6000rpm |
All times are GMT +1. The time now is 07:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands