What is a TD04 Turbo good for bhp wise ??
As above really, I have a 2001 wrx bugeye and i believe the turbo is a TD04 and would like to know what bhp they are good for if possible please ?
Any advice welcome...:thumb: Cheers! cossie-nutter |
With a full decat you should get about 280bhp on did on my03 wrx before i put graded it more :thumb:
|
When I was having mine mapped last month by Andy Forrest I asked him what kind of power they were good for, and he said they reach their limit around 275bhp.
|
Originally Posted by TerzoAlan
(Post 8188361)
When I was having mine mapped last month by Andy Forrest I asked him what kind of power they were good for, and he said they reach their limit around 275bhp.
its about right, that's a safe level depends what you want from the car i wanted a litter more so he put it to 280bhp |
About 280bhp, but an Andy Forrest hybrid is good for 320bhp whilst retaining the 04s early spool...
|
Originally Posted by GC8
(Post 8188387)
About 280bhp, but an Andy Forrest hybrid is good for 320bhp whilst retaining the 04s early spool...
Yes that's right i got his TD05 20g hybrid now very good units a bit laggy but one hell of a punch :) |
I had 285bhp on my standard TD04 and 290 is certainly not unheard of.
|
A couple of people have seen 300bhp on stock TD04's, but that is with major additional mods, most people would have gone for a larger turbo before that point!
Simon |
286 on mine :)
|
289 on my supposedly
|
300 can be seen: you can definately get 280-odd out of any TD04 though.
|
Only reason andy f didnt map mine higher was due to the restriction of the cat on my turbo up pipe. If only I had known at the time
|
Really didn't expect you could achieve the likes of 300. Surely that would be pushing it/waiting for the inevitable though(on a standard td04)?
Think I better get my car dyno'd to find out what it's running, as I've been thinking it's in the region of 260. It was dyno'd at almost 250 before mapping with the apexi, but I put the big difference in the way it pulls now down to Andy's mapping skills, not peak figures. |
As most above mines 280 as mapped by AndyF
|
Thank you for all your advice peeps it's been a great help.
Anyone want to swap a TDO4 for a TD05 In good condition fpmsl :wonder: :thumb: :lol1: |
280 bhp is about the most you will get - however a bad dyno will give you 300. It does not really matter as long as torque is good. The way it drives is more important I think.
I have 280 bhp, and 303 ib/ft torque on dyno dymanics roller |
All times are GMT +1. The time now is 02:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands